606726

BRK PRO-DC8410-600 Manual

30
Zoom out
Zoom in
Previous page
1/48
Next page
Page 30
Next configure DDNS settings in the DVR
From the Network Setup menu, enter Primary or Secondary DNS from the WAN
settings of your router in the DNS field
1. Click DDNS SETTINGS.
2. Under DDNS, select ON.
3. Under SERVICE, select DYNDNS if you obtained your domain name from
DynDNS.com.
4. Under DOMAIN NAME, enter your DDNS domain name you received
from the confirmation email. For example, if your domain name is adam@
dyndns.com, you need to enter adam@dyndns.com, in the text field using
the Virtual Keyboard.
5. Enter your DDNS user name and password in the respective fields.
6. Click APPLY. Click OK in the confirmation window.
7. Click EXIT. The system will prompt you that it must restart. Click OK.
Port Forwarding
Port Forwarding allows computers and devices outside of your network to communicate with the DVR. You will need to forward
ports 80, 100 and 9000 from the attached router to the IP address of the DVR. Gather the make, model and IP address of the
router. If you changed the default router login, then you will need to know the user name and password for that router. Follow
these steps:
Step 1: How to Determine the IP Address of the DVR
NOTE! The DVR and PC must be connected to the same router and both must be
powered up before proceeding.
1. Select DHCP from the TYPE drop down box in the NETWORK SETUP
Menu. You should see the message “Getting IP...” The router will assign an
IP address.
2. Restart the DVR.
3. Once the DVR has restarted, reopen the Network Setup window and the
IP address of the DVR will now be listed. This is the address to which
you will forward ports 80 and 9000. If you plan to access your DVR via a
smartphone, you will need to forward port 100 as well. Be sure to configure
the Mobile Network screen of this DVR with port 100. See Mobile Phone
Setup in this manual for details.
Step 2: Configure your Router for Port Forwarding
NOTE: Although all routers are different, the following is the basic information
that needs to be configured. Consult your Router Manual for details on Port
Forwarding configuration for your specific router. Some Internet Service
Providers (ISP) may block access to these settings in the router they provide.
You may need to contact your ISP to make these changes for you.
1. Access your routers’s Port Forwarding screen (See image at right). Your’s
may be slightly different but the information required is the same.
2. Enter your port forwarding information for each port you want to forward.
As noted above you will need to forward ports 80, 100 and 9000.
• Assign a name
• Start Port: 80; End Port: 80
• Enter your DVR IP address you obtained from “Step 1: How to
Determine the IP Address of the DVR”
• Click Apply and repeat for the remaining ports.
DDNS Setup
Network Setup-Getting IP Address
REMOTE Access
Network Setup
Port Forwarding Screen from Router
Port Forwarding Naming Tip
For clarity and easier identification of ports in your router we suggest naming the ports as follows: Port 80 is for
your Web Browser - name this port “DVR-Web”. Port 9000 is for streaming media - name this port “DVR-Media”.
Port 100 is for your mobile phone - name this port “DVR-Mobile”.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK PRO-DC8410-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK PRO-DC8410-600 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info