606845
44
Zoom out
Zoom in
Previous page
1/48
Next page
Page 44
FAQ
,
s
If your problem is not listed below, please call our toll-free number for more support.
Tech Services: 800-323-9005
.
Question: Why is the DVR not working after starting?
Answer:
• Check the power adaptor input
• Check the on-off power line, is it well-connected?
• Check the power on-off switch on the back of the unit
• Check the main board of DVR is connected properly
Question: Why is the DVR rebooting automatically or stopping for several minutes after starting?
Answer:
• Instability or low input voltage
• Bad track on hard drive or the hard drive is bad
• Insufficient power supply
• Instability of the front-end video signal
• High temperature, too much dust, bad DVR operating environment
• Check to make sure the main board connector is secure
• The hardware of DVR is defective
Question: Why is there no video output on single, multi or all channels?
Answer:
• Please check the adaptor of camera whether to see if it is well-connected
• Please check the cable for connecting video input/output in the back panel of DVR
• Please insert the video source directly into the display device and check if they are causing the problem.
• Check the brightness of the picture and bring it back to its original default setting
• No video input signal or too weak
• In Display Setup, Live View is set to OFF for a particular channel
• The DVR hardware is defective
Question: Why can’t the DVR record after startup and why is there an “H” showing on the screen?
Answer:
• Make sure power adaptor is DC 12V
• Make sure hard drive is formatted
• Check the power and data connection cables of the hard drive
• The hard drive is defective
• The SATA port is not working
Question: What is the meaning of the letters “R”, “M”, “I”, “H” and “B” showing on the screen?
Answer:
• “R”means the channel is recording
• “M” means motion detection on the channel
• “I” means alarm on the channel
• “H” means either the hard drive is not installed, it is bad or full or needs formatting
• “B” means Tamper Alarm has been activated
Question: Why is the DVR having a problem with real-time images, such as bad image color or serious brightness dis-
tortion?
Answer:
• If PAL and NTSC are not correctly selected, the images will be in black and white and rolling
• DVR is not compatible with monitor
• The video transmission distance (cable run) is too long. You may need to upgrade to RG59 Coax BNC/DC Power cables for
runs longer than 60 feet.
• The setting of DVR color settings need to be adjusted
Question: Why is there no audio sound when monitoring?
Answer:
• Check sound box or speaker functions. Also check possible short circuit.
• Audio source may be connected to the video channel. You can click to full-screen to check.
• The hardware of DVR is defective
• Cameras are not audio capable or no powered microphone is connected.
• Mute is enabled
Appendix
FAQ
,
s
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK PRO-DC8410-520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK PRO-DC8410-520 in the language / languages: English as an attachment in your email.

The manual is 5,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info