606765
5
Zoom out
Zoom in
Previous page
1/8
Next page
Page 5
Installing camera
Step 1: Select the position for the camera and drill holes for the anchors using the paper template
provided. (Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.)
Step 2: Install batteries according to “+ /- polarity marker”. Insert the two AA batteries into the battery
compartment.
Step 3: Do not tighten screws completely so you can attach the camera base through the keyhole slots.
Fit camera body keyhole slots to the screws. Slide camera onto screws and rotate camera to lock into
keyhole slots. Note: If camera is loose, adjust depth of screws until camera fits snugly.
Step 4: Decoy camera toggles On/Off by pressing down on the dome. You may need to activate the
decoy camera after installing the batteries.
Battery Replacement - Instructions for Use
Always purchase the correct size and grade of battery most suitable for in-
tended use. Replace all batteries of a set at the same time. Clean the battery
contacts and also those of the device prior to battery installation. Ensure
the batteries are installed correctly with regard to polarity (+ and -). Remove
batteries from equipment that is not to be used for an extended period of
time. Remove used batteries promptly.
product overview
Installation
Install Camera
Mounting Keyhole Slots
on bottom of alarm
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK PRO-DC3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK PRO-DC3 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info