606724
45
Zoom out
Zoom in
Previous page
1/48
Next page
Page 45
Question: Why is there no audio during playback?
Answer:
• Audio settings not correct: open audio-video item and check the audio to see if it is closed in playback interface
Question: Why is my system time not correct?
Answer:
• Wrong setting or user did not click “Edit” to confirm
• Circuit Board battery is not connected properly
• Circuit Board battery is dead. Please change.
Question: Why does the “Stop recording” function on the Quick Access Menu or Remote Control not work?
Answer:
• The “Stop recording” by the right mouse button is for Manual Recording only. It can not stop recording when it is on a set
schedule or on motion recording. If you want to stop a scheduled recording, please make changes in the RECORD menu.
Question: Why is motion detection not working?
Answer:
• The setting of motion detection area is not correct
• Sensitivity is too low
• Record SWITCH is turned off for that channel (RECORD Menu)
Question: Why do I have a USB device error?
Answer:
• The data exceeds the capacity of backup device
• The backup device is incompatible
• The backup device is damaged
Question: Why does the Remote Control not work?
Answer:
• The remote control is not for this DVR
• The distance of remote control is too far or the angle is too great
• Remote control batteries are dead or low
• Remote control is damaged or the receiver port on the front panel of DVR is damaged or blocked
Question: Why can’t I log in over the Internet?
Answer:
• Please check the network to see if it is connected. Check if LINK or 100M LED is displayed normally on the panel; use ping
xxx.xxx.xxx.xxx (DVR IP) to check if the Internet is linked properly.
• Make sure you are running Windows 7, Vista or XP operating system and Internet Explorer 6.0 - 8.0
• ActiveX control has been blocked. Please manually install ActiveX control again.
• Please install DX8.1 and upgrade your video card driver
Question: Why is there is no picture or picture is not clear when I preview the recording or playback the recording via
Internet Explorer?
Answer:
• Please choose “WAN” in “web environment”
• Try opening and closing windows again by right clicking the mouse button
Question: Why am I receiving a message indicating “other members are setting......” when accessing my DVR settings
through Internet Explorer
Answer:
• Someone else is setting the DVR or the Main Menu is open on the DVR. Close the DVR configuration interface or exit the DVR.
Question: Why do I get a message stating “Not Enough Resources” when I have not exceeded the 480 frame rate total
for NTSC recording?
Answer:
• Although the chipset is the standard NTSC 480, part of the resources are used for other internal functions and cannot be al-
located to recording resources. A frame rate of 420 fps is the maximum that can be allocated.
Appendix
FAQ
,
s
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK PRO-D1610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK PRO-D1610 in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info