606847
26
Zoom out
Zoom in
Previous page
1/29
Next page
Page 50 Page 51
technIcal specIfIcatIons
Item
devIce
parameter
specIfIcatIon
system
Language English/ Chinese
GUI 16 Bit Graphic menu (OSD Menu)
Password User password, Administrator password
vIdeo
Video in 4 ch composite video input 1.0Vp-p, impedance 75Ω, BNC
Video out 1 ch composite video output, BNC
Video display 4-channel: 1/4 channel switch
Video standard
PAL, 25 f/s, CCIR 625line, 50 scene
NTSC, 30 f/s, CCIR 525 line, 60 scene
audIo
Audio input 2-ch audio input, impedance 600Ω, RCA
Audio output 1-ch audio output, impedance 600Ω, RCA
Record style Audio video recorded simultaneously
Audio compression ADPCM
pIcture
processIng
and storage
Picture compression H.264
Picture resolution CIF/HD1/D1
Audio style ADPCM
Video code rate
CIF: 384~768 Kbps
HD1: 512~1024 Kbps
D1: 512~1024 Kbps
Audio code rate 32 KB/s
Data storage One 500GB SATA HDD included, up to 2 TB capable
alarm
Alarm input 4 alarm inputs
Alarm output 1 alarm output
connectIons
PTZ interface Supports PELCO-D, PELCO-P
Mouse Mouse USB 1.1
Data USB 2.0
Network interface RJ45, 10M/100M
vga
VGA output None
softWare
upgrade
USB Supports USB firmware upgrade
other
Voltage input AC:110~240V, DC 12V
Power Consumption 8.7W without HDD
Working temperature 14 °F to 122 °F (-10 °C to 50°C)
Video impedance input 75Ω each channel
Video output 1Vp-p CVBS signal
appendIx
hard drive
appendIx
specifications
hard drIve removal and InstallatIon
HDD Installation
To install or replace the hard drive in the DVR:
1. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM
THE DVR BEFORE REMOVING COVER. FAILURE TO DO SO CAN
RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS AS
WELL AS INJURY OR DEATH
2. Remove screws securing the cover of the DVR and remove cover
3. Disconnect the hard drive power and data cables
4. Remove the screws securing the hard drive rails to the chassis.
(See image at right)
5. Remove screws securing hard drive rails to hard drive
6. Remove old hard drive and replace with the new one.
7. Re-install the screws securing the hard drive to the rails and rails
to the chassis.
8. Re-connect the hard drive power and data cables.
9. Replace the cover and screws. Note: Format hard drive per
instructions in HDD MANAGEMENT section.
Caution!
When working with electrostatic sensitive
devices such as hard disk or DVR
unit, make sure you use a static-free
workstation. Any electrostatic energy
coming in contact with the hard disk or DVR can damage
it permanently.
Hard Drive Format
NOTE: A new hard drive must be formatted
after installation. Format per instructions
in the HDD MANAGEMENT section of this
manual.
Hard Drive - Remove/Connect Cables
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM
THE DVR BEFORE REMOVING COVER. FAILURE TO DO SO CAN
RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS AS
WELL AS INJURY OR DEATH.
The lightning ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION!
RISK OF ELECTRIC SHOCK
Remove Screws Securing Rails to Chassis
Remove four screws
Hard Drive - Remove/Install Rails
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK HS-4705-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK HS-4705-400 in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info