606761
36
Zoom out
Zoom in
Previous page
1/40
Next page
Page 36
error poSSible cauSe SolutionS
System is not receiving power
or is not powering up
Cable from power adapter is loose or
is unplugged. No power at electrical
outlet.
• Confirm that all cables are connected correctly.
• Confirm that the power adapter is securely connected to the back of the unit.
• Confirm power is on at electrical outlet.
The receiver and cameras are
on but there is no image on the
screen
Screen lock may be on.
• Tap the Power button to unlock the screen.
• Disable Screen Auto-lock
Live View Screen has no icons Screen lock may be on.
• Tap the Power button to unlock the screen.
• Disable Screen Auto-lock
SD Card is not detected by the
system
SD Card is not formatted • Format SD card per instructions.
There is no picture on selected
channels/camera picture is not
being displayed
Camera out of range • Locate camera closer to receiver.
Camera not “Paired” • Connect camera through Camera Pairing menu.
Signal is blocked
• If possible, remove major obstacles in between the camera and the receiver.
Or, relocate the camera to another location.
The power supply for the camera is not
plugged in
• Confirm camera power supply is connected correctly.
No power being received at the electri-
cal outlet
• Confirm power is on at electrical outlet
At night, only white appears on
the screen
The camera’s infra-red LEDs shine
invisible light that reflects of surfaces
such as glass causing white light
• Place the camera on the other side of windows to try to improve the night
vision or place in a well lit area.
A black and white image ap-
pears at night
This is normal operation for night vision • No action required.
The system will not record
under SCHEDULE/MOTION
detection setting
System not set up correctly or memory
card is missing
• Ensure correct DATE AND TIME has been set and the Record Schedule setup
correctly.
• Ensure the memory card is inserted into DVR and formatted
SD Card is full (0% remaining)
and the unit is no longer record-
ing. “MEMORY FULL PLEASE
FORMAT” is on the screen.
Memory Card Full • Re-format memory card.
The recording on the DVR ap-
pears but does not have sound
Mute is on and more than one camera
is activated
• Turn Mute off and activate only one camera. This feature is used to record
images without sound for legal purposes. See page 17 for audio recording
caution statement and details.
Channel(s) disappear during
auto or manual scan
Channel(s) has been turned OFF • Turn Camera (s) ON in Camera Setup menu.
Poor image quality Interference
• Place the camera and/or receiver antenna at a new angle or readjust its posi-
tion to make an improvement.
• Remove obstacles between the camera and receiver that might affect the
signal (e.g., furniture, cabinets, and walls.)
• Relocate the camera closer to the receiver.
Low or unstable signal
Antenna direction is limited • Adjust the camera antenna and receiver position
Signal has been blocked
• If possible, remove major obstacles in between the camera and receiver. Or,
relocate the camera to another location.
Strong radio signal nearby • Keep WIFI router away from the camera and/or receiver.
Strong electromagnetic interference
nearby
• Keep active appliances such as hair dryers, heat fans, air conditioners, water
pumps, or microwave ovens away from the camera and/or receiver.
Audio Feedback Camera and receiver are too close
• The camera has a high sensitivity microphone. Keep the camera at least
10 feet away from the receiver. If the camera must be within 10 feet of the
receiver, keep the volume down.
TROUBLE
SHOOTING
TROUBLESHOOTING
APPENDIX
8
TROUBLESHOOTING
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK DWH-472 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK DWH-472 in the language / languages: English as an attachment in your email.

The manual is 10,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info