606762
6
Zoom out
Zoom in
Previous page
1/8
Next page
Page 6
TROUBLESHOOTING/SPECIFICATIONS
APPENDIX
4
TECHNICAL SPECIFICATIONS
Item DevIce Parameter SPecIfIcatIon
Camera
Wireless Parameters
2.4 GHz secure digital wireless with 24 transmission channels using Frequency Hop-
ping Spread Spectrum (FHSS) technology
Communication Range
2.4 GHz secure digital wireless at approximately 500 feet (150 meters) open space line
of sight
Camera Resolution 640 x 480
Image Sensor OmniVision OV7725 1/4” CMOS
IR LED’s 25
IR Cut Filter Automatic for daytime true color
Weather Resistant Rating IP-66
Night Vision 60’ (18m)
Operating Temperature 14 °F to 122 °F (-10 °C to 50°C)
Operating Voltage DC 5V / 1A
Current Consumption IR LED ON :550mA ; IR LED OFF :350mA
Dimensions
4.2”D (106mm) x 2.4”W (61mm) x 2.7”H (68mm) camera barrel only
4.8”D (122mm) x 2.8”W (71mm) x 8.0”H (203mm) w/stand and antenna
SPECIFICATIONS
error PoSSIble cauSe SolutIonS
System is not receiving
power or is not powering up
Cable from power adapter is loose or is un-
plugged. No power at electrical outlet.
• Confirm that all cables are connected correctly.
• Confirm that the power adapter is securely connected to the back of the unit.
• Confirm power is on at electrical outlet.
There is no picture on
selected channels/cam-
era picture is not being
displayed
Camera out of range • Locate camera closer to receiver.
Camera not “Paired” • Connect camera through Camera Pairing menu.
Signal is blocked
• If possible, remove major obstacles in between the camera and the receiver. Or, relocate
the camera to another location.
The power supply for the camera is not plugged in • Confirm camera power supply is connected correctly.
No power being received at the electrical outlet • Confirm power is on at electrical outlet
At night, only white appears
on the screen
The camera’s infra-red LEDs shine invisible light
that reflects of surfaces such as glass causing
white light
• Place the camera on the other side of windows to try to improve the night vision or place
in a well lit area.
A black and white image
appears at night
This is normal operation for night vision • No action required.
Poor image quality Interference
• Place the camera and/or receiver antenna at a new angle or readjust its position to make
an improvement.
• Remove obstacles between the camera and receiver that might affect the signal (e.g.,
furniture, cabinets, and walls.)
• Relocate the camera closer to the receiver.
Low or unstable signal
Antenna direction is limited • Adjust the camera antenna and receiver position
Signal has been blocked
• If possible, remove major obstacles in between the camera and receiver. Or, relocate the
camera to another location.
Strong radio signal nearby • Keep WIFI router away from the camera and/or receiver.
Strong electromagnetic interference nearby
• Keep active appliances such as hair dryers, heat fans, air conditioners, water pumps, or
microwave ovens away from the camera and/or receiver.
Audio Feedback Camera and receiver are too close
• The camera has a high sensitivity microphone. Keep the camera at least 10 feet away
from the receiver. If the camera must be within 10 feet of the receiver, keep the volume
down.
TROUBLE
SHOOTING
TROUBLESHOOTING
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK DWH-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK DWH-400 in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info