606747
74
Zoom out
Zoom in
Previous page
1/99
Next page
Page 74
Configuring Quota Mode
To configure each camera with allocated quota for
the storage of recorded files and captured pictures.
Enter the Storage Mode interface:
Menu > HDD > Advanced.
1. Set Mode to Quota.
NOTE
:
Reboot the DVR to enable changes.
2. After the reboot, return to this screen and select a
camera.
3. Enter the storage capacity.
Settings can be copied to other cameras if
needed by clicking Copy. Select the camera to
apply the settings to and click OK.
You can also click the checkbox of Analog to
select all cameras.
4. Click Apply
If the quota capacity is set to 0, then all
cameras will use the total capacity of HDD for
record.
HDD MANAGEMENT
Checking HDD Status
To check the status on the installed HDDs, enter
the HDD Information interface:
Menu > HDD > General.
NOTE
:
If the status of HDD is Normal or
Sleeping, it works normally. If the status
is Uninitialized or Abnormal, please initialize the
HDD before use. And if the HDD initialization is
failed, please replace it with a new one.
Checking HDD Status in System Information
Interface:
1. Enter the System Information Interface:
Menu > Maintenance > System Info.
2. Click the HDD tab to view the status of each
HDD displayed on the list.
NOTE
:
NOTE
:
NOTE
:
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK DVRAHD-1620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK DVRAHD-1620 in the language / languages: English as an attachment in your email.

The manual is 7,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info