606730
40
Zoom out
Zoom in
Previous page
1/56
Next page
Page 40
Network Setup for Remote Access
Your Smartbridge system is capable of connecting to a
local area network (LAN) to view remotely, without the use
of port forwarding. Please follow the steps below.
1. Right click and select “System Setup.” Then
select “Network,” then “Setting”. This will allow
you to view all of your network settings.
2. Plug the Ethernet cable from your router the
Ethernet port on the back of the DVR.
3. Plug the ethernet cable from the DVR to a
free ethernet port on the router.
4. Make sure “Automatic DHCP” is check marked.
5. Your IP address, subnet mask, DNS, and gate will
automatically populate AFTER you restart the DVR.
6. Port should stay at 9101.
7. Note the Device ID in the dialogue box. This is your
unique Smartbridge ID Code. (pictured right)
8. Online Status should display online when you have
connected the Ethernet cable into the Ethernet Port
on the DVR. You must also have internet on you
home network for this to work. (pictured right)
9. You must install the Smartbridge software to your
computer to view the cameras locally or remotely.
10. Insert the CD Rom disk into the CD drive on
your computer. Run Smartbridge.ex
11. Click Install to start the installation wizard and
to install the Smartbridge Software.
12. The Smartbridge Icon will appear on your desktop
after the installation wizard is finished. Double click
the icon to run the Smartbridge Software.
REMOTE ACCESS
NETWORK SETUP
Network Setup for Remote Access
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK DVRAD0805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK DVRAD0805 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info