Manual Brixton BQ-6310F (page 22 of 48) (English, German, Dutch, French)

531006

Zoom out

Zoom in

1/48

GAS CONNECTION

Check whether your barbecue is installed correctly. This manual provides detailed mounting

instructions which include specific mounting procedures. Strictly observe these instructions to ensure

correct and safe installation of the barbecue.

For correct functioning of the barbecue, it is important to place the barbecue on an even surface.

This barbecue is set up to be used with butane or propane gas bottles from 5kg till 15kg, with

appropiate gas pressure regulator.

For replacement of the gas pressure regulator and hose please see below table for correct

specifications:

Category

Gas and pressure

Countries

Injector

I3+ (28-30/37)

Butane 28mbar /

Propane 37mbar

GB. IE, BE. CH. ES. FR.

GR. IT & PT

Burner: 0,97mm

I3 B/P (30)

Butane / Propane

30mbar

DK, FI, GR, LU, NL, NO

& SE

Burner: 0,97mm

The gas hose must not be longer than 1.5 mtr. Only use approved connections. The gas hose

needs to be adjusted if national circumstances require. The gas hose needs to be fitted in such

a way that it can not be twisted.

For your safety:

Make sure all black plastic grommets of the pressure regulator are in place, and that the hose is not

making contact with the heat protection of the BBQ itself.

Connect the pressure regulator to your gas cylinder.

VERY IMPORTANT:

 The temperature of the regulator may not exceed 60°C (140F).

The regulator must be equipped with a safety valve or pressure limiter.

 The opening of the regulator must fit the connection of the gas tap of the cylinder.

 Check whether the gas tap of the tank is completely closed (turn clockwise until the knob stops).

 Check whether the gas tap of the gas cylinder is provided with suitable outer threads.

 Make sure that all burner knobs are set to position “off”.

 Remove the protective cover from the gas tap of the gas cylinder. Always use the protective cover

supplied with the gas tap.

 Inspect the connection between the gas tap and the pressure regulator. Look for damage and dirt.

Remove any debris. Check the hose for any damage. Never try using damaged or blocked

equipment. Contact your local L.P. gas supplier for repairs.

 When connecting the pressure regulator to the gas tap, manually turn the nut clockwise until it

doesn’tgo any further. Do not use a wrench to tighten the nut. Using a wrench can damage the

joints, which can be dangerous (as illustrated in the picture below).

 Turn the gas tap of the cylinder fully open (counter-clockwise). Use a solution of water and soap to

check for any leakage before trying to ignite the grill. If you encounter a leak, you must shut off the

gas tap and only use the grill after the leak is repaired by a local L.P. gas supplier.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brixton BQ-6310F in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brixton BQ-6310F Manual

Product: