767975
15
Zoom out
Zoom in
Previous page
1/242
Next page
DE GB FR
12
5. Chassis
5.1
Unfolding the chassis
1. Release the transport lock by
pulling the latch.
2. Unfold the chassis by lifting up the
handle.
3. Ensure that the chassis locks lock
into position as indicated by the
pictures.
4. Raise the handle to required posi-
tion, see below.
WARNING!
• Keep children away from the
pushchair during unfolding
and folding.
• Ensure that the chassis
locks are engaged before
use.
5.2
Adjusting handle
Adjust the height of the handle by pres-
sing in the buttons on the height adjus-
ter on both sides of the handle (Pic. 4).
Raise/lower the handle to the required
position, release the buttons and the
handle will lock into its new position.
2.
3.
4.
5. Gestell
5.1
Aufstellen des Gestells
1. Zum Lösen der Transportverrie-
gelung ziehen Sie die Verschluss-
klinke.
2. Zum Aufstellen des Gestells ziehen
Sie den Schiebegri nach oben.
3. Stellen Sie sicher, dass die Gestell-
verriegelungen einrasten wie in den
Abbildungen gezeigt.
4. Bringen Sie den Schiebegri in die
gewünschte Position (siehe unten).
VORSICHT!
• Halten Sie Kinder vom
Kinderwagen fern, während
Sie diesen auf- oder
zusammenklappen.
• Vergewissern Sie sich
vor Gebrauch, dass alle
Verriegelungen des Gestells
eingerastet sind.
5.2
Einstellen des
Schiebegris
Halten Sie die Knöpfe der Höhen-
verstellung auf beiden Seiten des
Schiebegris gedrückt, um diesen zu
verstellen (Abb. 4). Den Schiebegri in
die gewünschte Position bringen und
die Knöpfe loslassen, darauf rastet der
Gri in seiner neuen Position ein.
1. 5. Châssis
5.1
Dépliage du châssis
1. Relâchez le verrou de transport en
tirant le loquet.
2. Dépliez le châssis de la poussette
en tirant la poignée vers le haut.
3. Vérifiez que le châssis est verrouillé
sur la position telle qu’indiquée
dans les images.
4. Relevez la poignée sur la position
souhaitée (voir ci-dessous).
AVERTISSEMENT !
• Tenez les enfants éloignés
de la poussette lorsque vous
la pliez et dépliez.
• Vérifiez que les verrous du
châssis sont enclenchés
avant de l‘utiliser.
5.2
Réglage de la poignée
Réglez la hauteur de la poignée en
appuyant sur les boutons présents sur
le réglage en hauteur des deux côtés de
la poignée (figure 4). Levez/Abaissez la
poignée sur la position désirée, relâchez
les boutons pour que la poignée se
verrouille sur sa nouvelle position.
151216_BRITAX_SMILE_2.indd 12 17/12/2015 19:39:45
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Britax SMILE 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Britax SMILE 2 in the language / languages: All languages as an attachment in your email.

The manual is 29,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info