767958
27
Zoom out
Zoom in
Previous page
1/131
Next page
3. Installation of your child seat (positioned backward) in a rear
middle seat 9-25kg
3f
2
1
4
3
3h
2
1
3i
Place the fastening belt around the driver
seat, as well as the passenger seat, as
shown in (Fig. 3f).
If your car has an eyelet in the glide rail
of the set, this can alternatively be used
(Insert in Fig. 3g).
IMPORTANT – Do not install the
anchoring belts with luggage straps.
Loop the end of the loops of the fastening belts around the seat in front and
back again, as illustrated 1 (Fig. 3h). Put the ends of the fastening belt
toward the outside of the car seat and guide these through the loops 2.
When the support leg brackets are pointing to the front and the belts are not
twisted, lock the buckle of the fastening belt into the tongues on the sides
of the child seat 3. Tighten the fastening belts by pulling the loose ends
downwards evenly 4.
Pull the support leg as far away from the back of the child seat as possible
1 (Fig. 3i). Lower the support leg as far as the oor, maintaining the correct
angle 2. Move the support leg and ensure that the support leg is secured.
Finally, ensure that the fastening belts are fully tightened, by pulling down
on the loose ends (Fig. 3j). The support leg must be resting on solid ground
at an angle of 100° to the horizontal. It must not rest on the aps of storage
compartments or similar (Fig. 3j). Use the angle measurer on the last page
of these operating instructions, in order to check the angle of the support leg
against the oor.
Check whether the child seat is rmly installed by moving it back and forth,as
well as sideways. If it is loose or if the support leg is not at an angle of 100° to
the oor, you will need to reinstall it, so that it is secured at the correct angle.
Put your child into the seat according to Fig. 5f + 5g.
100° 80°
3j
3g
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Britax-Romer MULTI-TECH III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Britax-Romer MULTI-TECH III in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 21,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info