Manual Britax-Romer KIDFIX III M (page 2 of 2) (English)

767962

Zoom out

Zoom in

1/2

6. Place the child safety seat in driving direction on a

vehicle seat approved for use.Ensure that the back-

rest 14 is ﬂush with the backrest of the vehicle seat.

8. Push both ISOFIT locking arms 06 into the insert

guides 02 until the ISOFIT locking arms 06 engage

on both sides with a clicking sound.

DANGER! The green safety button 08 must be

visible on both sides so that the child

safety seat is correctly fastened.

9. Hold the ISOFIT settings button 09 down and push

the child safety seat as far back as possible.

1. Carry out the steps in Section 8 "ADJUSTING THE HEADREST".

2. Place the child seat on the vehicle seat. Ensure that the backrest 14 is

ﬂush with the backrest of the vehicle seat.

Tip! If the head restraint of the vehicle seat prevents the child seat from being

fastened in place properly, it should be removed (see vehicle operating manual).

After removing the head restraint, secure it in a suitable place in the vehicle so

that it cannot be thrown around.

3. Carry out the steps in Section 10 "SECURING YOUR CHILD".

11. Carry out the steps in Section 10 "SECURING

YOUR CHILD".

For the safety of your child, before every journey in the car check that...

►the child safety seat is slotted in on both sides with the ISOFIT locking arms

06 in the ISOFIT fastening points 01 and both safety buttons 08 are fully

green;

►the child safety seat is securely fastened;

►the lap belt 16 runs in the bright red belt guides on both sides of the seat

cushion 05 ,

►the

lap belt

runs through the bright red

SecureGuard 10 .

►the diagonal seat belt section 17 on the side of the vehicle seatbelt buckle

18 also runs through the light red belt guide 05 of the seat cushion,

►the diagonal seat belt section 17 runs through the dark red belt holder 03 of

the headrest,

►SICT 04 are correctly installed and used,

►the diagonal seat belt section 17 runs diagonally backward,

►the straps are tight and not twisted,

►the seatbelt buckle 18 must not be positioned on the red belt guide 05 in

the seat cushion.

DANGER!

If your child try to use to open the vehicle belt buckle 18 or

introduce the diagonal belt section 17 into the bright red SecureGuard 10 ,

stop as soon as possible. Check whether the child safety seat is correctly

fastened and ensure that your child is correctly secured. Explain to your

child the dangers associated with his actions.

7. SAFETY NOTES

Please take the time to read these instructions carefully and keep them

to hand in the intended storage compartment 13 on the child safety seat

at all times! The instructions must be with the child safety seat if the latter

is passed on to a third party.

DANGER! For the protection of your child:

• In the event of an accident with a collision speed of more than 10 km/h, the

child safety seat may be damaged without the damage becoming immediately

visible. In this case the child safety seat must be replaced. Please dispose of

it properly.

• As a rule, have your child safety seat checked if it was damaged (e.g if it falls

on the ground).

• Regularly check all important parts for damage. Ensure that all mechanical

parts, in particular, are fully functional.

• Never lubricate or oil parts of the child seat.

•

Never leave your child unattended in the child seat in the vehicle.

• Only allow your child to enter and exit the vehicle on the pavement side.

• Protect the child safety seat from intensive direct sunlight when it is not in use.

The child safety seat can get very hot in direct sunshine. Child skin is sensitive

and could thereby be harmed.

•

The more snugly the belt ﬁts over your child's body, the better they will be

protected. Therefore avoid putting thick clothes on your child under the belt.

• Take regular breaks on long journeys in order to give your child the

opportunity to play around.

• Use on the rear seat: Move the front seat forward far enough that you child's

feet cannot hit the backrest of the front seat (to prevent risk of injury).

DANGER! For the protection of all vehicle occupants:

In the case of an emergency stop or an accident, unsecured persons or objects

may cause injury to other vehicle occupants. Please always check that...

• the backrests of the vehicle seats are locked (i.e. that any foldable rear seat

bench latch is engaged).

• all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are

secured.

• all persons in the vehicle have their seatbelts fastened.

• the child safety seat is always secured when it is in the vehicle, even if no child

is being transported.

WARNING! For your protection when handling the child seat:

• Never use the child safety seat free-standing, not even for test sitting.

• The backrest 14 may tip backward. Always place the child seat on the vehicle

seat before having your child sit down in it.

• When swivelling up the backrest 14 , nothing must come between the

backrest 14 and the seat cushion15 . You or your child could pinch your

ﬁngers, injuring them.

•

To avoid damage, ensure that the child safety seat is not jammed in between

hard objects (car door, seat rails, etc.).

•

Keep the child safety seat in a safe place when it is not in use. Do not place any

heavy objects on the seat and do not store it directly next to sources of heat or

in direct sunlight.

CAUTION! To protect your vehicle:

•

Certain car seat covers made from more sensitive materials (e.g. velour, leather,

etc.) may sustain signs of wear and tear when using child safety seats. For

optimum protection of your car seat covers, we recommend using the BRITAX

RÖMER car seat protector from our range of accessories.

PAGE II

For the safety of your child, before every journey in the car check that...

►the child safety seat is securely fastened;

►the lap belt

runs in the bright red belt guides on both sides of the seat

cushion

►the

lap belt

runs through the bright red

SecureGuard 10 .

►the diagonal seat belt section 17 on the side of the vehicle seatbelt buckle

18 also runs through the light red belt guide 05 of the seat cushion,

►the diagonal seat belt section 17 runs through the dark red belt holder 03

of the headrest,

►the diagonal seat belt section 17 runs diagonally backward,

►the straps are tight and not twisted,

►SICT 04 are correctly installed and used,

►the seatbelt buckle 18 must not be positioned on the red belt guide 05 in

the seat cushion.

DANGER! If your child try to use to open the vehicle belt buckle 18 or

introduce the diagonal belt section 17 into the bright red SecureGuard 10 ,

stop as soon as possible. Check whether the child safety seat is correctly

fastened and ensure that your child is correctly secured. Explain to your

child the dangers associated with his actions.

A correctly set headrest 22 ensures that the diagonal seat belt section 17 is

optimally positioned, and gives your child optimum protection.

The headrest 22 must be adjusted so that there is a space two ﬁngers wide

between the headrest 22 and your child's shoulders.

To adjust the height of the headrest to ﬁt your child:

1. Reach into the adjustment handle 12 on the back

of the headrest 22 and pull it towards you.

This unlocks the headrest.

2. You can now move the unlocked headrest 22 to

the desired height. As soon as you release the

adjustment handle 12 , the headrest 22 will lock

into place.

3. Place the child safety seat on the vehicle seat.

4. Have your child sit down in the child safety seat and

check the height. Repeat the procedure until the

headrest 22 has the correct height.

1. If your vehicle is not ﬁtted with ISOFIX insertion aids by standard, clamp

the two insertion aids 02 , with are included in the scope of delivery of the

seat*, with the section pointing upwards to the two ISOFIX fastening points

01 of your vehicle.

TIP!

The ISOFIX fastening points are located between the surface and the backrest

of the vehicle seat.

* The insertion aids facilitate the installation of the child safety seat with the

use of the SOFIX fastening points and prevent damage to the car seat covers.

As long as they are not used, remove them and keep them in a safe place. For

vehicles with foldable a backrest, the insertion aids need to be removed before

folding the backrest. Any problems occurring usually come from soiling or ex-

ternal objects on the insertion aids and on the hook. Remove soiling or external

objects to rectify such problems.

2. Moving the headrest of the vehicle seat into the top position.

3. Carry out the steps in Section 8 "ADJUSTING THE HEADREST".

8. ADJUSTING THE HEADREST

9. INSTALLATION

With ISOFIT + 3-point belt

The

KIDFIX III M

is installed permanently in the vehicle with the ISOFIT locking

arms.

Your child is then buckled into the child seat with the vehicle's 3-point seatbelt.

4. Hold the ISOFIT settings button 09 down and push

the ISOFIT locking arms 06 out in full .

2. Pull out the vehicle belt and guide it in front of your

child to the vehicle seat buckle 18 .

DANGER! Ensure the vehicle belt is not twisted, as

otherwise the full protective eect of the

retaining system is not ensured.

3. Engage the buckle tongue in the vehicle seat buckle

18 with a CLICK!

4. Place the diagonal seat belt section 17 and lap

belt section 16 on the side of the vehicle seatbelt

buckle 18 into the light red belt guide 05 of the seat

cushion.

DANGER! The vehicle seatbelt buckle must not

be positioned between the light red belt

guide and the armrest.18 05

6. Guide the lap belt section 16 into the bright red

SecureGuard 10 .

DANGER!

Do not guide the diagonal the section

into the bright red SecureGuard

7. Guide the diagonal seat belt section 17 into the dark

red belt holder 03 of the headrest 22 until it lies

completely in the belt holder 03 and is not twisted.

Tip! If the backrest

conceals the belt holder

you can adjust the headrest

upwards. The diagonal

seat belt section

can now be easily inserted. Now

return the headrest

to the proper height.

8. Ensure that the diagonal belt 17 runs over the col-

larbone of your child and is not on the neck and that

the key on the belt holder is 03 fully closed.

Tip! You can still adjust the height of the headrest 22

again here in the vehicle.

1. Unscrew the SICT 04 anti-clockwise (on the side

closer to the vehicle door) until it has a distance of

5 mm to the vehicle door or has been unscrewed to

the maximum.

5. Push the green safety button

and the red release

button

on both sides of the seat towards each

other. This ensures that both hooks on the ISOFIT

locking arms

are open and ready to use.

10. SECURING YOUR CHILD

UNFASTENING YOUR CHILD AND REMOVAL:

To unfasten your child or to remove the child safety seat, observe the steps in

Section 6 "REMOVAL AND DISPOSAL" [PAGE I]

The

KIDFIX III M

is not installed permanently in the vehicle. It is simply secured

together with your child using the vehicle's 3-point seatbelt.

With 3-point belt

7. Position the two ISOFIT locking arms 06 directly in

front of the two insertion aids 02 .

UNFASTENING YOUR CHILD AND REMOVAL:

To unfasten your child or to remove the child safety seat, observe the steps

in Section 6 "REMOVAL AND DISPOSAL" [PAGE I]

Adjusting the backrest:

The backrest 14 is connected to the seat cushion 15 by

an articulated axis. The backrest 14 of the child seat can

be adjusted to any inclination of the vehicle seat.

Please know that optimal protection is guaranteed only if

the vehicle seat is in an upright position.

5. Also place the lap belt section 16 on the other side

of the seat cushion in the light red belt guide 05 .

DANGER! The lap belt section 16 must lie as low

as possible over your child's hips on

both sides.

2212

0807

0602

16 05

17 10 16

10. Shake the child safety seat to ensure that it is

securely fastened and check again the fastening

buttons 08 to ensure that both are fully green.

DANGER! The diagonal seat belt section 17 must

run diagonally backward. You can adjust

the course of the belt with your vehicle's

adjustable belt deﬂector.

DANGER! The diagonal belt 17 must never be

directed forwards to the belt deﬂector

on the vehicle. In this case, use the child

safety seat on the back seat only.

9. Tighten the vehicle seat belt by pulling on the diagonal

seat belt section

10. Observe the further steps of the relevant installation

type.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Britax-Romer KIDFIX III M in the language / languages: English as an attachment in your email.

The manual is 2,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Britax-Romer KIDFIX III M

Britax-Romer KIDFIX III M User Manual - German - 2 pages

Britax-Romer KIDFIX III M User Manual - Dutch - 2 pages

Britax-Romer KIDFIX III M User Manual - French - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Britax-Romer KIDFIX III M Manual

Product: