Manual Brita PURITY 600 Quell ST (page 23 of 146) (English, German, Dutch, Danish, French, Italian, Polish, Spanish)

504579

Zoom out

Zoom in

1/146

4 Installation

Caution: Prior to installation, read the Technical Data (Chapter 12) and the Operating and Safety

Information (Chapter 3). After the product has been stored and transported at temperatures below

0°C, it must be stored with the original packaging open for at least 24 hours before commissioning.

4.1 Delivery Scope

For installation of a PURITY Quell ST new ﬁ lter, you need the packaging units pressure vessel

(incl. ﬁ lter cartridge) and pressure vessel lid

Prior to installation, remove the entire delivery scope from the packaging and check that everything

is present:

1 x Pressure Vessel

1 x Pressure Vessel Lid

1 x Filter Cartridge

1 x Manual

1 x Carbonate Hardness Test

If part(s) of the delivery scope are missing, please contact your local BRITA Ofﬁ ce.

4.2 Assembling the Pressure Vessel and the Pressure Vessel Lid

Stand on the kick loops •

Lift the pressure vessel •

and turn clockwise until the mantle handles

are

over the kick loops

Remove the transport protective cap •

from the ﬁ lter cartridge.

Check the O-ring seal of the ﬁ lter cartridge •

for correct seat in the groove

and for dirt and damage.

Note:• The cartridge seat has been lubricated with food-safe lubricant at the

factory.

Stand on the kick loops •

Place the pressure vessel lid •

in the position “INSERT“ on the pressure

vessel

with the lock

in the appropriate groove.

Press the pressure vessel lid •

down and turn clockwise until the lock

engages.

Push the ﬂ ush hose •

onto the ﬂ ush valve

4.3 Assembly of Inlet and Outlet Hoses (e.g. coffee machine)

Note: The inlet and outlet hoses are not included in the standard scope of delivery. The use of

BRITA hose sets (Chapter 12) or hoses according to DVGW W543 is recommended. The ﬂ ush valve

supplied ensures that the hose to the consumer (e.g. coffee machine) is closed in the ﬂ ush posi-

tion.

Fit hoses to the inlet and outlet of the pressure vessel lid •

. Ensure that the O-rings on the

inlet and outlet are seated correctly.

Note: No additional use of ﬂ at seals is necessary.

Caution: The max. tightening torque at the 1" and 3/4" connections must not exceed

15 Nm! When using hoses not made by BRITA make sure that only connections with ﬂ at seals

are used. Conical seal shapes damage the ﬁ lter head connections and invalidate any guarantee

claims. The ﬂ ow direction indicated by the arrows on the connector head

must be observed.

During assembly, comply with the installation dimensions (Chapter 11), bending radii of the

hoses and dimensions of the accessories (e.g. hose sets). The system can be operated verti-

cally and horizontally. Use the wall mounting (Chapter 12) to install the system in a vertical posi-

tion only! If no original BRITA hose sets are used, the 1" – 3/4" reducer

supplied must be used

to ensures correct sealing of the non-return valve.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brita PURITY 600 Quell ST in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brita PURITY 600 Quell ST Manual

Product: