497161
28
Zoom out
Zoom in
Previous page
1/142
Next page
26
Reminder function fi lter usage period in months
Irrespective of the remaining capacity display function, you can set a monthly limit of
2–12 months to activate a reminder function for fi lter replacement. If the monthly limit has been
reached up to a month before the export of the set time limit, it is signalled by the date fi eld
ashing. Factory set to 12 months.
Example: When set to 9 months, the date fi eld starts to fl ash on the display after 8 months.
Operating the display unit
To operate the display unit, it must be removed from the connecting fi ttings.
Slide the display housing up approx. 10 mm and pull off the display unit.
The display unit is operated using a button on the back of the display unit.
The display unit is supplied in standby mode. To activate the display, press the
button on the back once briefl y and then reset after inputting the parameters.
Parameter input water hardness and fi lter system size
At this level, parameters needed for operation are set manually.
The type and size of fi lter system is selected, the unit of hardness is set, the local carbonate hard-
ness or total hardness of the tap water is entered, and the maximum cartridge service life (monthly
limit) is activated. After this the parameters must be accepted.
To activate the display, press the back button once
(< 1 second) until the data fi eld appears.
< 1 sec
Press and hold the button (> 4 seconds and
< 10 seconds) until the parameter input for the fi lter
system type and size fl ashes.
> 4 sec
Press and hold the button (> 2 seconds) until the fi lter
system type (STD, STM, GYP) and corresponding value
for the fi lter system size (04, 06, 12) has been reached.
> 2 sec
Press the button once (< 1 second) to access the next
parameter input unit of hardness. The unit of hardness
ashes.
< 1 sec
Press and hold the button (> 2 seconds) until the
desired unit of hardness has been selected.
> 2 sec
Press the button once (< 1 second) to access the next
parameter input hardness value. The hardness value
input fl ashes.
< 1 sec
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brita PURITY 450 Steam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brita PURITY 450 Steam in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info