497163
98
Zoom out
Zoom in
Previous page
1/142
Next page
96
Ahora ya pueden aceptarse los parámetros establecidos.
Para proceder a la aceptación de los parámetros, siga los pasos siguientes:
Pulse el botón 1 x (< 1 segundo) hasta que aparezca el
mensaje «Reset» y parpadee.
< 1 sec
Pulse el botón 1 x (> 2 segundos) hasta que aparezcan
la capacidad total (con una mezcla del 0%) y la fecha
actual.
> 2 sec
Los parámetros determinados han sido aceptados.
Nota: si no se produce ninguna introducción durante más de 30 segundos, el indicador regresa al
modo de funcionamiento o standby sin aceptar parámetros modifi cados.
Coloque el indicador por delante a una altura aproximada de 10 mm y empuje hacia abajo. Los
topes del indicador deben encajarse en las ranuras de la cabeza de medición. Seguir con el
Capítulo 5.4 Lavado/ventilación de sistemas de fi ltro con y sin unidad de medición e indicación.
5.3 Ajuste de mezcla
Determinacn del ajuste de mezcla
Determinación del ajuste de mezcla según el uso al que va destinada y la dureza de carbonatos
determinada (Capítulo 7). A continuación se ajustará la mezcla en el tornillo de mezcla
19
del modo
siguiente: girar el tornillo de mezcla
19
hasta que la mezcla deseada (03) coincida con la marca.
!
Atención: utilice una llave Allen de 6 mm o 7/32".
!
Nota: Nunca fuerce el tornillo del by-pass para evitar daños.
5.4 Lavado/ventilacn de sistemas de fi ltro con y sin unidad de medicn e indicacn
Nota: para el lavado/ventilación se necesita un cubo de 10 litros.
Coloque horizontalmente el sistema de fi ltro.
Abra la válvula de limpieza
9
completamente.
Abra completamente la válvula de admisión
7
en la manguera de admi-
sión
6
, sosteniendo la manguera de descarga en el cubo. Deje salir por lo
menos 10 litros a un caudal mínimo de 3 l/min (180 l/h).
Cierre la válvula de limpieza
9
, coloque el fi ltro y vacíe el cubo.
Abra con cuidado la válvula de limpieza
9
, sosteniendo la manguera de des-
carga en el cubo.
Deje correr nuevamente por lo menos 10 litros.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brita PURITY 1200 Steam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brita PURITY 1200 Steam in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info