535841
30
Zoom out
Zoom in
Previous page
1/39
Next page
Renovent HR Medium/Large 5e druk mei 2006 25
7.3 Displaycodes
Storing Hoofdstuk 7
Tabel foutcodes
Foutcode Oorzaak Actie gebruiker Actie installateur
F1
Communicatie met de toevoer-
ventilator is verbroken. Wanneer
onbalans ontoelaatbaar is, zal ook
de afvoerventilator stil gaan staan
Neem contact op met de instal-
lateur.
Controleer de bedrading van de MCU naar de toevoer-
ventilator
Controleer of de dip-switch van de MCU van de toe-
voerventilator op <OFF> staat.
Vervang de MCU en de bedrading.
F2
De toevoerventilator staat stil.
Wanneer onbalans ontoelaatbaar
is, zal ook de afvoerventilator stil
gaan staan.
Neem contact op met de instal-
lateur.
Controleer de bedrading naar de toevoerventilator.
Vervang de MCU en de bedrading.
F4
Communicatie met de afvoerventi-
lator is verbroken.
Neem contact op met de instal
-
lateur.
Controleer de bedrading van de MCU naar de afvoer
-
ventilator.
Controleer of de dipswitch van de MCU van de afvoer-
ventilator op <ON> staat
Vervang de MCU en de bedrading
F5
De afvoerventilator staat stil. Neem contact op met de instal-
lateur.
Controleer de bedrading van de MCU naar de afvoer-
ventilator.
Vervang de MCU en de bedrading
F8
Er is een onbalans geconstateerd,
terwijl is ingesteld dat dit niet toe-
laatbaar is.
Toestel reageert niet op standen-
schakelaar zolang de storing niet
is opgeheven door op knop "OK"
te drukken
Reinig de filters.
Neem contact op met de in-
stallateur .
Controleer of een andere ventilator in hetzelfde kana-
lensysteem is geactiveerd
Voer onderhoud uit volgens §8.2.
Stel de luchtvolumes per stand opnieuw in.
Controleer de correcte werking.
F9
De temperatuurvoeler die de tem-
peratuur van de aangezogen bui-
tenlucht meet is defect. Het toestel
werkt normaal, maar de bypass is
buiten werking.
Neem contact op met de instal-
lateur.
Controleer de bedrading van de voeler naar de basis-
print.
Controleer de aansluiting van de voeler op de bedra-
ding.
Vervang de voeler.
F10
De temperatuurvoeler die de tem-
peratuur van de afzuiglucht meet is
defect. Het toestel werkt normaal,
maar de bypass is buiten werking.
Neem contact op met de instal-
lateur.
Controleer de bedrading van de voeler naar de basis-
print.
Controleer de aansluiting van de voeler op de bedra-
ding.
Vervang de voeler.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brink Renovent HR Medium-Large at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brink Renovent HR Medium-Large in the language / languages: Dutch as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brink Renovent HR Medium-Large

Brink Renovent HR Medium-Large Installation Guide - English, German, Dutch, French - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info