Manual Brink Renovent Excellent 180 (page 54 of 164) (English, German, Dutch, French)

535553

Zoom out

Zoom in

1/164

10 Renovent Excellent 180

The Renovent Excellent 180 is also available as “Plus” version.

This version is equipped with a different control board with 2

additional connectors (X14 & X15) with more connection opti-

ons for various applications.

The “Plus” version has a 9-pole connector which is connected

to X15 from the control board. This 9-pole connector is acces-

sible from the top of the Renovent Excellent 180.

The 2-pole connector X14 is accessible after sliding the control

board to the front from the appliance (see §9.2 item 1 - 5). An

additional gland is available at the top of the appliance in “Plus”

version>. That makes it possible to feed a 230 V cable, which

may be connected to connector X14, to outside the appliance.

Always use a gland with strain reliever.

See § 11.1 for more information on the connection possibilities

of connectors X14 and X15.

Chapter 4 Operation

4.3 Frost safety

To prevent freezing of the heat exchanger at extremely low

outdoor temperatures, the Renovent Excellent 180 features

frost control. Temperature sensors measure the temperatures

across the heat exchanger and, if an optional preheater is in-

stalled, it will be switched on when required.

That guarantees a proper ventilation balance, also at very low

outdoor temperatures. If, with switched on preheater, the ex-

changer temperature still starts to drop below zero, stepless

unbalance is created in the appliance.

4.3 Renovent Excellent Plus version

4.1 Description

The appliance comes plug and play and operates fully auto-

matically. The exhausted indoor air heats up the fresh, clean

outdoor air. That saves energy and fresh air is sent to the re-

quired rooms.

The control system has four ventilation modes.

Dependent on the connected multiple switch, 3 or 4 ventilation

PRGHVFDQEHXVHG7KHDLUÀRZUDWHFDQVHSDUDWHO\EHDG-

MXVWHGIRUHDFKYHQWLODWLRQPRGH7KHFRQVWDQWYROXPHFRQWURO

V\VWHPHQVXUHVWKDWWKHDLUÀRZUDWHRIWKHVXSSO\DQGH[KDXVW

fans is realised independent of the duct pressure.

4.2 Bypass function preconditions

Because of its compact design, the appliance is not equipped

with a bypass diffuser but it uses bypass functionality. Bypass

functionality means that the supply fan is switched off when the

E\SDVVSUHFRQGLWLRQVDUH VDWLV¿HG7KHQ WKHUH LVRQO\D PH-

FKDQLFDOH[KDXVWDLUÀRZWKURXJKWKHKHDWH[FKDQJHUVRXQ-

der these conditions -undesired- heat recovery does not occur.

Optimum performance of this system requires natural supply. It

is assumed that at very high indoor temperatures the user will

automatically open the windows for reasons of comfort. The

RSHUDWLRQRIWKHE\SDVV IXQFWLRQFDQEH DGMXVWHG XVLQJ VWHS

number 5, step numbers 6 and step number 7 in the settings

menu (see chapter 13).

Bypass function preconditions

Bypass function active - The outdoor temperature is higher than 10°C and

- the outdoor temperature is lower than the indoor temperature in the dwelling and

- the temperature in the dwelling is higher than the temperature set at step no. 5 in the set-

tings menu (set a standard at 22°C)

Bypass function not active - The outdoor temperature is lower than 10°C or

- the outdoor temperature is higher than de indoor temperature in the dwelling or

- the temperature from the dwelling is higher than the temperature set at step no. 5 in the set-

tings menu minus the preset temperature at hysteresis (step no. 6); the factory setting for

this temperature is 20°C (22.0°C minus 2.0°C).

Feed-through op-

tion for 230V cable

from X14.

9-pole connector

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brink Renovent Excellent 180 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brink Renovent Excellent 180 Manual

Product: