562815
97
Zoom out
Zoom in
Previous page
1/112
Next page
91
Using a custom boot script and logo
With BrightSign software version 1.1, you can change the startup logo or add a boot script. Both
the logo and boot script are stored in the internal FLASH and have a size limit of 200KB.
Using your own boot logo
1 Save your logo in one of the following file formats: BMP, 8 bit indexed, or RLE encoded.
2 Copy your logo to a CF card.
3 Connect your BrightSign to a PC using a null modem cable (see Accessing the BrightSign
shell for details).
4 Run a terminal emulation program such as HyperTerminal (see Accessing the BrightSign
shell for details).
5 Insert the CF card into your BrightSign and apply power.
6 When the terminal prompt appears, type the following (where LOGO.BMP is the name of
your logo file):
writebootfile logo.bmp boot.bmp
7 Reboot BrightSign, and your logo should appear.
Using your own boot script (HD600 only)
You can create your own boot script using a self-contained script file. For example, the boot script
can't be used to play a playlist or interactive playlist. You can, however, use the boot script to play
any content on your CF card (images, audio, and videos).
1 Save your boot script as MYSCRIPT.BAS.
2 Copy MYSCRIPT.BAS to a CF card.
3 Connect your BrightSign to a PC using a null modem cable (see Accessing the BrightSign
shell for details).
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BrightSign HD600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BrightSign HD600 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info