562815
83
Zoom out
Zoom in
Previous page
1/112
Next page
77
Other ways to update your BrightSign software
1 Download the latest software.
a
Go to the BrightSign web site
www.brightsign.biz/support
.
b
Click the
Software Downloads
link.
c
Compare the software version number with the number on your BrightSign screen.
d
If your BrightSign software is older than the software on the web site, click the
Software
link
for the appropriate model (HD600 or HD2000) to download the latest software.
2 Extract the software update file onto your CF/SD card and give it one of the following
names:
UPDATE.ROK: Use this file name if you want to auto-delete the update file after the
update is complete. This is useful when you want to distribute the update to the field on
the same CF/SD card that contains the presentation content. After the first boot, your
BrightSign automatically runs any auto-run content on the CF/SD card.
UPDATE_SAVE.ROK: Use this file name if you want to keep the update file on the CF/SD
card after the update is complete. This is useful when you want to use the same CF/SD
card to update multiple BrightSigns.
UPDATE_NEWER.ROK (HD2000 only): Use this file name if you want to apply the update
only if the version is newer than the version currently on your BrightSign. The update file
is not deleted.
UPDATE_DIFFERENT.ROK (HD2000 only): Use this file name if you want to apply the
update only if the version does not match the version currently on your BrightSign. The
file is not deleted.
3 Insert the CF/SD card into your BrightSign and apply power.
HD600:
Wait for your BrightSign to boot. (The display will be blank.) After several seconds one
of the LEDs on the front panel starts to flash. When the LED stops flashing, the upgrade is
complete. If you’re using the UPDATE.ROK method, BrightSign reboots automatically.
HD2000:
Wait for your BrightSign to boot. (The display will be blank, but the LEDs on the front
panel light as the unit boots.) Wait for the red upgrade LED to light up. During the upgrade,
the connector activity LEDs turn on and off to indicate that the upgrade is in progress.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BrightSign HD600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BrightSign HD600 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info