562817

BrightSign HD110 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
8
Setting up BrightSign Players
Before you can create and publish presentations, you must first set up the BrightSign players. To set up a player, you
need to create setup files in BrightAuthor and add those files to a storage device (SD card or USB flash drive). Afterward,
insert the storage (usually an SD card) into the BrightSign player. Remember that if you are using an SD card, it must be
formatted using FAT32 for the player to receive network updates and generate logs.
You can set up your BrightSign players for standalone use, add them to a Local Network, add them to the BrightSign
Network, or set them up for Simple File Networking. Adding players to a network allows you to remotely manage and
update your BrightSign players and presentations. Alternatively, standalone use requires inserting an updated storage
device into the BrightSign player each time you want to update content.
To set up your BrightSign player, complete the following steps:
1. On the menu bar, click Tools > Setup BrightSign unit.
2. Under Name Specification, enter a name and description for the unit.
3. Under Network Properties, choose whether you would like to Enable wireless (only some models have wireless
capability; please see the BrightSign Product Comparison Matrix for more details). Choose your preferred Network
Connection Priority and click on Advanced Network Setup if you would like to manually configure the player’s IP
address. This window contains other content download options depending on the Unit Configuration option you
choose.
4. Under Firmware, indicate whether you want to update the firmware and to which version. BrightAuthor requires a
minimum firmware version to correctly publish presentations to a BrightSign player.
5. Under Unit Configuration, choose one of the four setup options, and then complete the steps:
• Standalone: Under Unit Configuration, enabling the diagnostic web server and local web server is
optional.
• Local File Networking: Under Unit Configuration, enabling the diagnostic web server and local web server
is optional.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BrightSign HD110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BrightSign HD110 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info