Manual BrightSign 4K242 (page 18 of 26) (English)

562822

Zoom out

Zoom in

1/26

BrightSign 4K242, 4K1042, 4K1142

All information provided in this reference manual applies to products under development. The characteristics and specifications of these products are subject to

change without notice. BrightSign assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. © BrightSign LLC, 2014

The HDMI signaling has CEC (but no ARC or HEC) functionality. The CEC channel is electrically coupled to the

corresponding signal on the HDMI output, and the CEC commands will pass through the player even when it does not

have power.

3.5mm IR Out

The IR blaster generates or receives a space-encoded NEC or Pronto Hex signal. The two transported bit values of the

signal (0 and 1) are encoded using differing lengths of low-time IR pulses.

The 3.5mm IR in/out port has the following pinout:

• Tip: 3.3V

• Ring: IR Input

• Sleeve: IR Output

Note: The sleeve is used as a ground during input operations.

SPDIF Out

The SPDIF_OPT signal is generated within the BCM7444 CPU, which is connected directly to the SPDIF output.

Wireless

BrightSign 4K players feature a six-pin connector on top of the printed circuit board (PCB) within the case. This connector

allows installation of a peripheral wireless module that supports 802.11 a/b/g/n WiFi protocols.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BrightSign 4K242 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BrightSign 4K242 Manual

Product: