649137

Breville Nespresso Prodigio-Milk Manual

12
Zoom out
Zoom in
Previous page
1/15
Next page
Troubleshooting
Videos are available on the App and on www.nespresso.com - Go to section «services».
EN
232222
Troubleshooting Milk Froth Preparation
Aeroccino does not start. - Be sure to position the jug correctly on a clean base. Be sure to attach
the whisk to the jug correctly.
Quality of milk froth not up to standard. - Be sure to use whole or semi-skimmed milk at refrigerated temperature
(about 4-6 °C).
- Be sure to use the appropriate whisk and the jug is clean.
Red Button blinking. - a) The appliance is too hot.
Rinse it under cool water.
b) Whisk is missing.
c) Not enough milk. Fill milk frother up to one of the two «max» level.
Milk Overflows. - Be sure to use the appropriate whisk.
- Check the corresponding indicator level.
Aeroccino does not start. - Be sure to position the jug correctly on a clean base. Be sure to attach
the whisk to the jug correctly.
Quality of milk froth not up to standard. - Be sure to use whole or semi-skimmed milk at refrigerated temperature
(about 4-6 °C). For a best result, the milk must be newly opened.
- Be sure to use the appropriate whisk and the jug is clean.
Red Button blinking. a) The appliance is too hot.
Rinse it under cool water.
b) Whisk is missing.
c) Not enough milk. Fill milk frother up to one of the two «max» level.
Milk Overflows. - Be sure to use the appropriate whisk.
- Check the corresponding indicator level.
Pairing has not been successful. - Check that the Bluetooth
®
on the smartphone or tablet is activated.
- Check the compatibility of your smartphone or tablet with the machine (see
page 3).
- Ensure the smartphone or tablet is placed next to the machine during the pairing
- Make sure to not turn ON any microwave close to the machine during pairing.
If you want to unpair your machine,
via the app:
- Go on the App «Name», click on «Machine status»,then click on «Unpair this
machine».
- Click on «unpair this device» to confirm the unpairing.
- Note: In case of a unpairing, all the setups and specifications will be lost and the
machine will be reset to factory settings.
If you want to unpair your machine,
via the machine:
- Press simultaneously Ristretto and Espresso buttons and remove the plug
from the mains.
- Note: this action will deactivate the Bluetooth
®
function from the machine.
If you want to reactivate the Bluetooth
®
on
your machine, via the machine:
- Please reset to factory settings. See paragraph on «Reset to Factory Settings».
No light on the coffee buttons. - Machine turns OFF automatically. See paragraph on «Energy Saving
Concept».
- Check the mains: plug, voltage, fuse.
No coffee, no water, unusual coffee flow. - Check if the water tank is correctly positioned, if empty, fill with potable water.
- Descale it if necessary.
Coffee is not hot enough. - Preheat cup. - Descale the machine if necessary.
The slider does not close completely or the
machine doesn't start brewing.
- Empty the capsule container. - Check that no capsule is blocked inside the machine.
(Note: do not put the finger inside the machine)
Leakage (water under the machine). - Empty drip tray if full. - If problem persists, call the Nespresso Club.
Maintenance light is ON. - Empty the used capsule container and check no capsules are blocked.
- Check the water tank. If empty, fill with potable water and brew a coffee.
- If problem persists, call the Nespresso Club.
Nespresso light is ON. - It means your capsules stock is empty. You can order capsules via the App or
Nespresso website.
3 coffee buttons flash quickly. - To exit the descaling mode, press and hold the 3 buttons for 6 seconds until
the confirmation with a beep.
- If problem persists, call the Nespresso Club, or check the App for more
information.
Water or coffee flow does not stop even
when pushing a coffee button.
- Gently move the slider towards the back of the machine to stop the flow.
No coffee flow, water goes directly into the
drip tray (despite inserted capsule).
- Pull the slider to ensure it is closed. - If problem persists, call the Nespresso Club.
Machine turns to OFF mode. - To save energy the machine will turn to OFF mode after 9 minutes of non-use.
- See paragraph on «Energy Saving Concept».
- Press one of the coffee buttons to turn to "ON-mode" or open the slider.
EN
8775_UM_NESPRESSO_PRODIGIO_MILK_BREVILLE_.indb 22-23 20.10.15 12:33
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Breville Nespresso Prodigio-Milk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Breville Nespresso Prodigio-Milk in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info