23
Care, cleaning and storage
Before cleaning your bread maker, switch off and
then unplug from the power outlet and allow the
bread maker to cool completely.
BREAD MAKER
The inside and outside of the bread maker and
lid should be wiped with a soft, damp cloth then
dried thoroughly. If overspills, such as flour,
nuts, sultanas, etc. occur in the baking chamber,
carefully remove, using a damp cloth. Before re-
using your bread machine ensure that all parts are
completely dry.
NEVER immerse the bread maker or the bread
pan in water.
Note
BREAD PAN AND KNEADING BLADE
The inside of the bread pan and kneading blade
are coated with a high quality, non-stick coating.
As with any non-stick coated surface, NEVER use
metal utensils or abrasive cleaners on these items.
To clean the bread pan and blades:
Half fill the pan with warm soapy water (use a
non-abrasive detergent), allow to stand for 10-20
minutes. Remove the kneading blade and clean
both blade and inside of bread pan using a soft
cloth. Be sure to remove any crust or dough that
may become lodged around the drive shaft and
the kneading blade.
DO NOT USE HARSH CLEANERS, ABRASIVES,
BRUSHES OR STEEL WOOL.
NEVER WASH THE BREAD PAN OR KNEADING
BLADE IN THE DISHWASHER.
Some discolouration may appear on the bread
pan over time. This is a natural effect cause
by moisture and steam and will not affect the
bread in any way.
Note
STORAGE
When storing the bread maker, switch off and
then remove the power plug from the power
outlet. Ensure it is completely cool, clean and dry.
Place the bread pan and kneading blades into the
baking chamber and close the lid. Do not place
heavy objects on top of the lid. Store the bread
machine upright.
REPLACEMENT BREAD PAN AND
BLADES
Both the blade and bread pan coating are
operating parts of the bread maker and as such
are subject to normal wear and tear over the life
of the machine. Depending on your usage of the
bread maker they may need replacement if the
bread begins to stick.
SPARE PARTS
Replacement parts are available from Breville
Spare Parts:
Australia Customer Service: 1300 139 798
New Zealand Customer Service: 0800 253 007