Manual Brevi Fuego Sprint (page 8 of 32) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

768245

Zoom out

Zoom in

1/32

car seat in the car, make sure that during use none of its components is blocked by any movable part of the

seat or the door of the car. Adjust the height of the car seat according to the height of the child to ensure that

the belt is positioned correctly (Pics. 3, 4, 5). Check that the back of the car seat is perfectly locked to the

seat body using the appropriate ﬁxing guide on the back. This version can be used until the weight of the

child exceeds 25 kg. After this you must use the seat-body version. In this case release the back, rotating it

and pulling it out from the appropriate fastening guide. To replace the back, repeat these operations in rever-

se order. The Fuego car seat comes complete with a seat, a back, and a headrest,and is suitable for

children weighing less than 25 kg. From 15 kg to 36 kg the “seat-body” solution is best. In this case it

is sufﬁcient to release the back, rotating it and pulling it out from the appropriate fastening guide (Pic. 6). To

replace the back, repeat these operations in reverse order.

Warning: the car seat must never be installed on the seat of the car in the reclined position.

Place the car seat in the car so that the back of the car seat body is hard against the back of the vehicle

(Pic.7). Make sure that the strap of safetybeltretainer does not remain under the car seat. Place the child on

the car seat checking that the safety belt isn’t twisted and pass the abdominal part of the belt under the arms

to restrain the child’s pelvis correctly. Fasten the buckle and ensure that any slackness of the belt is taken

up by the self-rewinding mechanism. Fix the car seat with the safety belt pulled tightly. Push the webbing

retainer to the child’s shoulder where the diagonal belt of the vehicle is passing. Feed the diagonal portion

of the seat belt through the seat belt retainer A (Pic.5) Pull the harness adjustment strap to pull the seat belt

away from the child’s face and neck.

CLEANING THE CAR SEAT

Consult the fabric label sewn onto the product for washing instructions.

To clean the plastic parts of the car seat, simply rub them with a damp cloth.

Do not use solvents.

Protect the product from environmental elements, water, rain or snow; longer sun exposition can cause

variation in colour in many fabrics.

Keep the product in a dry place.

SAFETY REGULATIONS

No modiﬁcation or addition can be made to the car seat without speciﬁc approval of qualiﬁed authorities.

Any alteration to this product may mean it will no longer function correctly and will no longer be safe.

Failure to observe these rules can cause serious danger in the use of the car seat. In these cases the

manufacturer declines all responsibility. The car seat must be secured by the safety belt even when the child

is not in it. The car seat must be replaced after an accident. The violent stresses to which it is subjected in

these cases can alter its structure and solidity, thus compromising its safety. Do not allow the car seat to get

too hot by exposing it to the sun’s rays. Do not leave the child unattended in the car seat, inside the car.

When travelling, check periodically that the car seat and child are positioned correctly and that the belt is

fastened and tight. When travelling, do not leave unsecured objects or luggage inside the car. In the event

of an accident these could cause injuries.

IMPORTANT ADVICE

Follow the instructions in the order shown and become familiar with the Fuego Sprint before installing it

in your car. Failure to do so may be dangerous. Ensure that the Fuego Sprint is not damaged because of

problems with the folding seat or with the car door. Before each trip, be sure to adjust the safety belt of the

car according to the clothes the child is wearing. A belt adjusted for winter clothing, for example, will be too

loose for a child wearing summer clothes.Cover the Fuego Sprint if your car is left in the sun, since the metal

and plastic parts can cause burns when touched and the covering may bleach.

Be sure to lift the Fuego Brevi holding both the seat and the back at the same time.

Do not lift it only by the back or the headrest.

Keep the Fuego Brevi in a safe place when not in use. Do not place heavy objects on it and don’t put it near

heat sources such as radiators.

Keep it locked even when not in use.

Do not use Fuego Sprint with the abdominal belt alone.

Do not use Fuego Sprint facing backwards.

Do not use Fuego Sprint in the house, only in the car.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brevi Fuego Sprint in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brevi Fuego Sprint Manual

Product: