784614
8
Zoom out
Zoom in
Previous page
1/28
Next page
8
for the main unit (3) or the outdoor sensor (9) will be shown on the display
of the main unit.
USING TABLE STAND OR WALL MOUNTING
The main unit can be placed on a flat surface (e.g. table) with the fold-out
stand (18).
The main unit and the outdoor sensor can be mounted on walls using the
recessed wall mount hanger (17, 23).
OPERATION
Receiving measurements
Once batteries are installed to the outdoor sensor, it will start transmitting
temperature readings at roughly 60 second intervals. As soon as batteries
are installed in the main unit it will start searching for a signal from the outdoor
sensor for about 3-4 minutes. Upon successful reception of the signal, the
outdoor temperature will be displayed on the main unit. The main unit will
automatically update its readings at about 60 second intervals.
NOTE!
When the outdoor temperature is above or below the measurement range,
the display will show HHH (high) or LLL (low).
Manual time setting and other settings
To make manual settings, proceed as follows:
1. In normal time mode press the CF/SET touch control (12b) for approx. 3
seconds to enter the settings mode.
The value to be set is flashing. Value
settings order: hours > minutes > 12/24 hours > On/Off
2. Press MEM/ or CH/ to set the hours for the current time.
3. Press CF/SET to switch to the next setting.
4. Press MEM/ or CH/ to set minutes for the current time.
5. Press CF/SET to switch to the next setting.
6. Press MEM/ or CH/ to select 12 or 24 hours time mode.
7. Press CF/SET to switch to the next setting.
8. Press MEM/ or CH/ to switch between ON or OF to enable or disable
24 hour measurement data storage.
9. Press CF/SET to save and exit settings mode. If there is no operation for
20 seconds, the existing setting will be saved and the device returns to
normal display mode.
NOTE!
When choosing ON for 24 hour measurement data storage all stored MIN/
MAX values for temperature and humidity will be deleted daily at 0:00h!
Manual_7007402_Thermo-Hygrometer-VentAir_en-de_BRESSER_v012021a.indb 8 04.01.2021 16:38:52
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser VentAir - 7007402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser VentAir - 7007402 in the language / languages: English, German as an attachment in your email.

The manual is 2.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser VentAir - 7007402

Bresser VentAir - 7007402 User Manual - Dutch - 16 pages

Bresser VentAir - 7007402 User Manual - French - 20 pages

Bresser VentAir - 7007402 User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info