729918

Bresser TemeoTrend WFS 7007500HZI Manual

28
Zoom out
Zoom in
Previous page
1/40
Next page
28
2. The main unit should not stand close to metal window frames.
3. Please do not using other electrical products, such as headphones or
speakers, operating on the same signal frequency (433.92 MHz).
4. Electrical devices operating on the same signal frequency may also
cause interference. This can include devices used in the neighborhood
as well.
Main unit channel setting
1. The main unit can be connected with a maximum of up to 3 transmit-
ters.
2. Press the CHANNEL button to switch between the displays of each
channel. The main unit will display the information of the correspond-
ing transmitter. When the symbol
is displayed near the channel infor-
mation the automatic display rotation is activated. The display changes
between the information of the connected remote sensors every 10 sec-
onds.
NOTE!
The function to change the channels by pressing the CH-button can be
used only if more than one remote sensor is connected with the main
unit. Otherwise this function is disabled.
Automatic time setting
1. After the batteries are installed. The clock will automatically search for
the radio signal. It takes about 3-5 minutes to nish this process.
2. If the radio signal is received, the date and time will be set automatical-
ly and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the following
steps:
1. Press UP and DOWN button at the same time for approx. 3 seconds to
initialize radio signal reception manually.
2. If the time signal receiving fails again, the time can be set manually.
Manual time setting and user-dened settings
1. In normal display mode, press and hold the MODE button for approx 2
seconds to enter settings mode. ‘24Hr’ will ash.
2. Press the UP or DOWN button to change the value.
3. Press the MODE button to conrm and go to the next value to be
changed.
4. The setting order is 24/12 hour mode >> °C/°F >> hPa/inHg >> time
zone (-2 to +2 hours) >> hours >> minutes >> year >> month >> date >>
language (GE = german / EN = english / IT = italian / FR = french / SP =
spanisch) >> save and exit.
5. If there is no operation for 20 seconds, the existing setting will be
saved and the device returns to normal display mode. You can also press
the MODE button again to conrm and exit.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser TemeoTrend WFS 7007500HZI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser TemeoTrend WFS 7007500HZI in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser TemeoTrend WFS 7007500HZI

Bresser TemeoTrend WFS 7007500HZI User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info