Manual Bresser Messier Exos 2 (page 8 of 44) (English)

784595

Zoom out

Zoom in

1/44

Looking at or near the Sun will cause instant and irreversible damage to your eye!

Assembling

(EXOS-1 mount on ST-1 tripod)

Telescope Assembly

As you unpack your telescope, carefully note the following parts. The

assembly is shipped in separate boxes.

• Equatorial mount with polar alignment finder

• Heavy duty, adjustable steel tube tripod with leg braces, three tripod leg

lock knobs, and a captive mount locking knob

• Complete optical tube assembly including primary mirror with dust cover

and a rack-and-pinion focuser and eyepiece holders for both 1.25“ and

2“ eyepiece holders, tube cradle assembly with two rings and two lock

knobs

• Eyepiece

• Counterweight and counterweight shaft. Some models include an

additional counterweight.

• 8 x 50mm or 6 x 30mm viewfinder

How to Assemble Your Telescope

The giftboxes contain the optical tube assembly and the tripod with the

equatorial mount. The accessories are located within compartments cus-

tom-cut into the styrofoam block inserts.

instructions on telescope assembly. The packaging contains the main tube

and tripod components, the tripod with mounting and accessories.

1. Remove the components from the packaging and familiarise yourself

with them. Please refer to illustrations 1a to 1d for details of telescope

assembly. When removing the tripod from its packaging keep it parallel

to the floor as the inner legs may otherwise slide out as they are not yet

screwed tight.

2. Assembly - tripod: The tripod legs are preassembled and already con-

nected to the tripod head and accessory tray. Remove the tripod from

the packaging and place it in front of you, with the tripod legs on the

floor. Grab two legs and pull them apart until fully spread out. The tripod

weight rests only on one leg. Now level the tripod and adjust third leg

if necessary. Pull out the bottom part of the leg to the desired length

(Fig. 2b) and lock with the locking knob (3 pieces total) to a firm feel. Be

careful not to over tighten the screws! These screws lock the inner leg

segments to the desired tripod height.

3. Assembly - mounting accessory tray: The accessory tray (Fig.: 2a) Is

placed on the tripod spider with the flat side facing down, then locked in

place turning the tray approximately 60° clockwise. The three gudgeons

of the tray should be centered on the spider vanes and lock in place.

4. Assembly - installing the mount: position the mount on the tripod head

so that the nose on the tripod head meets the opening of the mount (Fig.

2e). Insert the central screw into the tripod head from the bottom and

screw the tripod head with the mount (Abb. 2e).

Fig. 2a: The tripod

Fig. 2b: tripod leg locks

Fig. 2c: Tripod head

assemblInG exos-1

Fig. 2d:

installing the mounting on

the EXOS-1 tripod.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bresser Messier Exos 2 in the language / languages: English as an attachment in your email.

The manual is 2.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser Messier Exos 2

Bresser Messier Exos 2 User Manual - German - 48 pages

Bresser Messier Exos 2 Quick start guide - All languages - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bresser Messier Exos 2 Manual

Product: