474042

Bresser Digital Nightvision 5 x 50 Manual

32
Zoom out
Zoom in
Previous page
1/38
Next page
32
Important!
It is advisable to remove the batteries when the device is not used
for more than 24 hours. This prevents the batteries from leaking
and extends their service life.
Please do not use rechargeable batteries, since the base voltage
they provide is insufcient. We recommend using high performance
type AA 1.5 V alkaline batteries.
Use
Remove the lens cap (6).
To switch on the device, turn the wheel (1) until it clicks – whereu-
pon the green indicator will light up. When the batteries are weak,
the indicator will light up red. Line up the device with an object that
is 20-30m away.
Look through the lens (2) and turn it until the black frame of the
screen is clearly visible. Adjust the sensitivity of the device (sen-
sitivity here refers to the brightness of the image) by turning the
wheel (1). To switch on the infrared lamp (4), place the switch (7)
in the IR position.
Adjust the focus to ensure a clear image of the object by turning the
lens (3). When adjusting the observation distance, you will achieve
a higher quality image simply by turning the lens (3) and adjusting
the sensitivity. No further turning of the lens is required, your device
is now set-up ready to use. To transfer the image obtained to an
external screen or for video recording purposes, connect the video
recording cable to the video output (8).
Focusing your device
First of all, look through the device and initially ensure the image
in the eyepiece (2) is sharp, and optimally adjusted to suit your
own eyesight (dioptre adjustment). Finally, turn the lens barrel (3),
to focus the image based on the distance from the object being
observed.
Tripod mount
Your night vision device includes two integrated tripod sockets (9)
on the underside. This facilitates the attachment of most commer-
cially available camera tripods.
Special operating characteristics
The device can be used in day or night, but should not be exposed
to any bright light.
If the device has initially been used in cold conditions and is then
brought into a warmer room, allow it to stand in its case for at least
2-3 hours to avoid any condensation forming on the electro-optical
elements.
Never immerse the device in liquids. Do not expose the device to
either rain or strong sunlight. Avoid exposure to severe shock or
heat sources, which may damage the device.
Do not connect any unsuitable installations to the video output (e.g.
headphones). This may cause the device to fail.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser Digital Nightvision 5 x 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser Digital Nightvision 5 x 50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info