Manual Bresser Digital Microscope (page 19 of 74) (English, German, Dutch, French, Italian, Portuguese, Spanish)

480805

Zoom out

Zoom in

1/74

ready on your system, you may skip to step 5.

4. In the welcome window, please accept the

Microsoft license agreement, and then click

“Install”. The installation can take a few min-

utes. As soon as everything is installed, click

“Finish”.

5. Now you will be presented with a choice, in

which you can choose your language.

Make your selection and conrm it by click-

ing „OK“.

6. When you see “Welcome“, click on „Next“.

7. In the next window, you will be asked for

the „Destination Folder“. Here, just click on

„Next“.

8. Now, the window with the Setup-Status will

appear – here, a progress bar will inform you

about the ongoing installation. This process

can take a few minutes.

9. Now, the window „Completed the Pho-

tomizer Setup Wizard “ will appear. At this

point, the driver installation begins, and a new

window opens. Here, click on „Next“ and

then on „Install“.

10. A pop-up window will appear; click there

on “continue installation”.

11. Finally, the window “driver installation

complete” appears.

12. Now, you will be asked to restart your

computer; click here on „Finish“.The installa-

tion is now complete.

Tip:

If you have questions or problems with the

“Photomizer SE” software, you can always go

to the program’s menu bar, and click on „?“

and then on „Open help“. For questions or

problems, you can look on the website www.

photomizer.net . Please ask your parents be-

fore using the Internet.

2.2 Driver installation

During Photomizer SE software installation

the correct driver for your operating system

will be installed automatically. No manual in-

put is needed.

In rare cases the device may not be recog-

nised by your computer. As a rule you need

then only install the driver manually from the

CD. If this fails please refer to the trouble-

shooting chapter that follows.

2.3 Troubleshooting: the device isn‘t

recognised by the computer (USB)

1. This occurs in rare cases whith some

OEM Windows Vista or XP versions. The de-

vice is not defective. Updating the notebook

or PC USB driver usually sufces.

2. If not, proceed as below. (The maker can-

not accept any liability whatsoever in these

cases

Delete ghost devices. These are devices

not actually currently connected to your com-

puter. The reason for this is that Windows

generates a system settings entry for each

USB device ( e.g USB Stick) on each port.

It then seeks that/those device/s each time

it‘s started. This slows down USB device rec-

ognition and Windows booting and causes

non-recognition of USB ports.

Cleaning up the system environment and de-

leting devices that are no longer in use helps

here. To do so right click WORKPLACE

(COMPUTER in Vista) and open the PROP-

ERTIES menu. Then click the ADVANCED

tab as in illustration 6 (ADVANCED SYSTEM

SETTINGS in Vista) and then ENVIRON-

MENT VARIABLES. Choose the NEW option

in ENVIRONMENT VARIABLES as in illustra-

tion 7. Enter the following under VARIABLE

NAME as in illustration 8.

devmgr_show_nonpresent_devices

Under VARIABLE VALUE enter „1“.

Conrm your input with OK and then reboot

the computer.

Change to the device manager. In the

VIEW menu activate the SHOW DEVICES

OPTION. The ghost devices previously not

shown will now be displayed in light grey.

Check the various categories including USB,

memory size, etc. Only delete entries for

devices you no longer use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bresser Digital Microscope in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bresser Digital Microscope Manual

Product: