Manual Bresser AR-152S-L (page 13 of 44) (English)

611625

Zoom out

Zoom in

1/44

NOTE:

Two eyepiece holders are included with your EXOS2-NT-telescope - for both 1.25”

and 2” eyepieces. To change eyepiece holders, unscrew the attached holder from

the focuser and thread on the other holder.

11. Adjust the height of the tripod: Adjust the height of the tripod by

loosening the tripod lock knobs (Fig. 11). Extend the sliding inner

section of each tripod leg to the desired length; then tighten each knob.

Adjust the tripod to a height that is comfortable for viewing.

Getting Started! – First Steps

Balancing the Telescope

In order for the telescope to be stable on the tripod and also for it to move

smoothly, it must be balanced. To balance the telescope, unlock the Right

Ascension or R.A. lock (33, Fig. 1d). When this axis is unlocked, the tel-

escope pivots on the R.A. axis. Later in the procedure, you will also unlock

the Declination or Dec. lock (17, Fig. 1d). When unlocked, the telescope

pivots on the Dec. axis. Most of the motion of the telescope takes place by

moving about these two axes, separately or simultaneously. Try to become

familiar with these locks and observe how the telescope moves on each

axis. To obtain a fine balance of the telescope, follow the method below:

1. Firmly hold the optical tube secure so that it cannot accidentally

swing freely. Loosen the R.A. lock (33, Fig. 1d). The optical tube now

moves freely about the R.A. axis. Rotate the telescope so that the

counterweight shaft is parallel (horizontal) to the ground.

2. Unlock the counterweight lock knob and slide the counterweight (21,

Fig. 1d) along the counterweight shaft until the telescope remains in one

position without tending to drift down in either direction. Then re-tighten

the counterweight lock knob, locking the counterweight in position.

3. Again, hold the optical tube so that it cannot accidentally swing freely.

Lock the R.A. lock (33, Fig. 1d), and unlock the Dec. lock (17, Fig. 1d).

The telescope now is able to move freely about the Dec. axis. Loosen

the cradle ring lock knobs (13, Fig. 1a) so that the main tube slides eas-

ily back and forth in the cradle rings. Move the main tube in the cradle.

Looking at or near the Sun will cause instant and irreversible damage to your eye!

fI r s t st e p s

Fig. 10b: Insert eyepiece into

diagonal prism and tighten

thumbscrews.

Eyepiece

Holder

Thumbscrews

Diagonal

prism

Viewfinder

Fig. 10a: Insert eyepiece intor holder

and tighten thumbscrews.

Eyepiece

Holder

Thumbscrew

Viewfinder

Fig. 11: Adjust the tripod height

using the leg lock knobs.

Leg lock knob

* Optional accessory for Exos 2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bresser AR-152S-L in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bresser AR-152S-L Manual

Product: