730059
21
Zoom out
Zoom in
Previous page
1/52
Next page
21 / 52
7. Turn the locking ring clockwise by hand to tighten.
8. Setting up power supply
NOTICE!Although the camera is equipped with an integrated battery, we recommend using a
permanent power supply. An in-car charger is included in the delivery for use while driving.
Removing the mount
Slide the mount sideways in the direction of the on/off button and then lift it out upwards.
9 Insert and format the memory card
1. Insert the appropriate microSD card* with the shorter side forward in the microSD card slot. The
contacts of the card must point towards the display.
2. Once the power supply is connected, the device switches on automatically and starts video record-
ing. Press the OK button to stop recording.
3. Press the MENU button twice to enter the 'Basic settings' setup menu.
4. Press the UP or DOWN button to select 'Format' and press the OK button.
5. Press the UP or DOWN button to select 'SD card' and press the OK button.
6. In the Info window ‘Format memory / Delete all data’ use the UP or DOWN button to select OK and
press the OK button. The storage medium will be formatted.
NOTICE!Formatting means that all data on the memory card will be irrevocably lost.
7. Press the MENU button to exit the menu.
8. Press and hold the ON / OFF button for 2 seconds to switch off the device.
9. Disconnect the device from the power supply.
10 Setting up power supply
Power supply via USB cable
1. Insert the mini USB connector on the USB cable into the USB connector socket on the camera.
2. Insert the USB-A connector on the cable into the empty USB port on the computer. The computer
provides the power supply once it has been switched on. The blue light appears on the camera.
NOTICE!Using a suitable USB network adapter*, the USB cable can also be used to connect the
camera to mains power or to a power bank.* Simply insert the USB-A connector into the corres-
ponding connector socket of the USB network adapter or power bank.
Power supply via in-car charger
3. Insert the mini USB connector on the in-car charger into the USB connector socket on the camera
4. Insert the vehicle connector plug into the on-board voltage connector (cigarette lighter). A direct
power supply is established. The blue function light appears.
*not included
11 Settings menus
1. In video record mode, photo capture mode or playback mode, press the MENU button to access
the settings menu for each mode. The corresponding menu items are displayed depending on the
selected mode.
2. Navigate through the menu items using the UP or DOWN button.
3. Press the OK button to call up the options for the particular menu item.
4. Choose the required setting using the UP or DOWN button (see the table below).
5. Press the OK button to confirm the selected setting.
6. Press the MENU button again to enter the settings menu for the basic camera settings.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 9686100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 9686100 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info