730063
18
Zoom out
Zoom in
Previous page
1/56
Next page
18
OFF position before testing the camera. The camera has
no internal memory for saving images.
Please do not insert or take out the SD-card when the
power switch is at ON position.
It is recommended to use the camera to format the SD-
card when used for the rst time.
The camera will be in USB mode when connected to a
USB port of a computer. In this case, the SD-card func-
tions as a removable disk.
3. Main operations
3.1 Power supply
A minimum of 4 batteries are required to power the camera.
There are a total of 8 battery compartments, with the battery
compartments 1,2,3,4 and 5,6,78, each forming one group.
You only need to ll one group with batteries to power the
camera. If both groups are equipped with batteries, the
standby time of the camera will double. When using only 4
batteries (1 group), you can either ll battery compartment
1,2,3,4 or 5,6,7,8. Other combinations are not possible!
ATTENTION!
The manufacturer does not take any liability for any damag-
es caused by a wrong insertion of batteries.
ATTENTION!
Make sure that the power switch is at the OFF position.
Open the battery compartment door and remove the battery
tray, by turning the two holders to the side. Install the fully
charged batteries into the battery tray according the polar-
ities shown. Re-Insert the battery tray. Pay attention to the
correct orientation (see illustration).
The following batteries with 1.5V output can be used:
1. High-density and high-performance alkaline batteries
(Recommended)
2. Rechargeable alkaline batteries
3. Rechargeable NiMH batteries
3.2 Insert the SD-card
Open the battery compartment door. Insert the microSD
card into the card slot with the unmarked side facing
upwards. Please note that the microSD card can only be
plugged in in one direction. Make sure that the write-pro-
tect switch of the SD-card is in the “write” position; other-
wise the camera cannot be switched on.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 9630200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 9630200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info