632917
8
Zoom out
Zoom in
Previous page
1/32
Next page
8
General Warnings
Risk of blindness — Never use this device to look directly at the sun or in the direct proximity of the
sun. Doing so may result in a risk of blindness.
Choking hazard — Children should only use the device under adult supervision. Keep packaging
material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a
choking hazard.
Risk of fi re — Do not place the device, particularly the lenses, in direct sunlight. The concentration
of light could cause a fi re.
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will
contact the Service Centre and can send the device in to be repaired, if necessary.
Do not expose the device to high temperatures.
• The device is intended only for private use. Please heed the privacy of other people. Do not use this
device to look into apartments, for example.
Parts overview
1. Focus wheel
2. Zenith mirror
3. Eyepieces (6 mm, 20 mm)
4. Telescope (Telescope tube)
5. Lens hood
6. Objective lens
7. Locating screw for the vertical fi ne adjust-
ment (for moving upward and downward)
8. Locating screw for the vertical axis
(for turning to the right and left)
9. Tripod legs
You should take some time to decide where you would like to set up your telescope. Choose a stable
surface like a table. Mount the telescope to the tripod with the locating screw for the vertical fi ne adjust-
ment (7) (Fig. 1). You can now place the zenith mirror (2) into the eyepiece holder and secure it with the
small screw on the connector (Fig. 2). Next, set the eyepiece (3) into the opening of the zenith mirror
(2) (Fig. 2). Here too, there is a screw with which you can screw the eyepiece onto the zenith mirror.
Note: First, put the eyepiece with the largest focal width (e.g. 20 mm) onto the zenith mirror. While
you'll get the least amount of magnifi cation, it will be easier for you to view things.
Azimuthal mounting
Azimuthal mounting means that you can move your telescope up and down, left and right, without hav-
ing to adjust the tripod.
Use the locating screw for the vertical fi ne adjustment (7) and the locating screw for the vertical axis (8)
to locate and lock onto the position of an object (to focus an object).
Which eyepiece is right?
It is important that you always choose an eyepiece with the highest focal width at the beginning of your
observation. Afterward, you can gradually move to eyepieces with smaller focal widths. The focal width
is indicated in millimetres and is written on each eyepiece. In general, the following is true: the larger
the focal width of an eyepiece, the smaller the magnifi cation. There is a simple formula for calculating
the magnifi cation:
Focal width of the telescope tube : Focal width of the eyepiece = Magnifi cation
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 91-18001 National Geographic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 91-18001 National Geographic in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info