632925

Bresser 91-01000 National Geographic Manual

17
Zoom out
Zoom in
Previous page
1/52
Next page
17
EN
Version 2
Fix the tripod to the tripod head with the help of the wing screw, washers and wing nuts (Fig. 1). Attach
the middle span to the tripod spans with the small screws (Fig. 2). The golden circle on the middle span
must be pointing upwards. Finally, screw the accessories caddy (14) onto the middle span.
Next, screw the vertical fi ne adjustment to the protruding silver metal supports on the telescope tube. It
is best if you let someone help you. Then you need to attach the telescope tube to the tripod. To do so,
use the spiral screw with the washers to screw the tube to the tripod head (Fig. 5). Attach the locking
screw for the vertical fi ne adjustment to the tripod head yoke (Fig. 6).
Version 1+2
Depending on the telescope model you have, screw your viewfi nder or LED viewfi nder to the holder
(Version 1, Fig. 3) or insert it directly (Version 2, Fig. 3). Then affi x the viewfi nder with screws. Check
carefully which step is right for your viewfi nder.
Take the lens cap off the eyepiece (6). You can now place the zenith mirror (16) into the eyepiece
holder and secure it with the small screw on the connector (Fig. 4). Next, set the eyepiece (15) into
the opening of the zenith mirror (16) (Fig. 4). Here too, there is a screw with which you can screw the
eyepiece onto the zenith mirror.
Note: First, put the eyepiece with the largest focal width (e.g. 20 mm) onto the zenith mirror. While
you'll get the least amount of magnifi cation, it will be easier for you to view things.
Which eyepiece is right?
It is important that you always choose an eyepiece (15) with the highest focal width for the beginning
of your observation. Afterwards, you can gradually move to eyepieces with smaller focal widths. The
focal width is indicated in millimeters and is written on each eyepiece. In general, the following is true:
The larger the focal width of an eyepiece, the smaller the magnifi cation. There is a simple formula for
calculating the magnifi cation:
600 mm ÷ 20 mm = 30 X
600 mm ÷ 12.5 mm = 48 X
600 mm ÷ 4 mm = 150 X
Formula for calculating magnification:
Focal length (Telescope) ÷ Focal length (Eyepiece) = Magnification
Examples:
Use of the moon fi lter
If the image of the moon is too bright for you, you can screw the green moon fi lter (17) into the bottom of
the thread of the eyepiece (15). Then you can set the eyepiece normally into the zenith mirror (16). The
image that you see by looking through the eyepiece is now greenish. The moon appears less bright,
so observation is more pleasant.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 91-01000 National Geographic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 91-01000 National Geographic in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info