632927

Bresser 90-11200 National Geographic Manual

16
Zoom out
Zoom in
Previous page
1/52
Next page
16
General Warnings
• Risk of blindness — Never use this device to look directly at the sun or in the direct proximity of the
sun. Doing so may result in a risk of blindness.
• Choking hazard — Children should only use the device under adult supervision. Keep packaging
material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a
choking hazard.
• Risk of fi re — Do not place the device, particularly the lenses, in direct sunlight. The concentration
of light could cause a fi re.
• Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will
contact the Service Centre and can send the device in to be repaired, if necessary.
• Do not expose the device to high temperatures.
• The device is intended only for private use. Please heed the privacy of other people. Do not use this
device to look into apartments, for example.
Accessories may vary depending on the model.
Parts overview
1. Telescope (telescope tube)
2. Viewfi nder or LED viewfi nder
3. Adjusting screws for the viewfi nder
4. Attaching screws and nuts for the holder
of the viewfi nder
5. Objective lens
6. Eyepiece holder (eyepiece connector)
7. Vertical fi ne adjustment knob (focus knob)
8. Telescope connecting piece
9. Tripod head with holder
10. Locking clips or screw for the tripod legs
11. Tripod legs (extendable)
12. Locating screw for the vertical fi ne
adjustment (upward and downward motion)
13. Locating screw for the vertical axis
(for turning to the right and left)
14. Accessories caddy
15. Eyepieces
16. Zenith mirror
17. Moon fi lter
18. Erecting lens
How to assemble the telescope
First, check if your telescope is comparable to version 1 or version 2 (pages 4 and 6). Before you get
started with the assembly, you should take some time to decide where you would like to set up your
telescope. It is important that you choose a place from which you have an uninhibited view of the sky,
where the fl oor is hard and even, and where you have enough space around you so that you feel com-
fortable. When you’ve found the ideal spot, you can begin the assembly.
Version 1
Open the locking clips on the tripod legs (10). Then pull the lower parts of the tripod legs (11) down-
ward as far as they will go. Finally, close the locking clips again (Fig. 1). You can change the height of
the tripod at a later time by making the tripod legs a bit shorter (again, opening the locking clips, adjust-
ing the legs, closing the clips).
Connect the telescope (1) to the tripod by pushing the telescope connecting piece (8) into the holder
on the tripod head (9) (Fig. 2). Screw the locating screw for the vertical fi ne adjustment (12) into the
holder in order to fi rmly connect both parts.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 90-11200 National Geographic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 90-11200 National Geographic in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info