784697
16
Zoom out
Zoom in
Previous page
1/60
Next page
16
Using the device
1. Turning the device on/off
To turn the device on or off, press and hold the Power button /MENU for 3 sec-
onds until you hear a beep sound.
2. Adjusting the volume
To increase the volume, press the UP button. Press the DOWN button to de-
crease the volume.
3. Low Battery Indication
The device can detect the low battery level when the battery voltage goes low. When
battery voltage is low, the battery icon will ash and a beep will be heard to indicate
that the batteries need to be replaced.
4. Receiving/transmitting communications:
The device is in „Receiving“ mode when it is turned ON and not transmitting. When a
signal is received on the current channel, the LCD will display it.
When you hold the Call/PTT (push to talk) button, the device switches to “Transmission
mode. Hold the device in a vertical position with the Mic (microphone) 3-5cm away from
your mouth. While holding the Call/PTT button, speak into the microphone in a normal
tone of voice. Release the Call/PTT button when you have nished transmitting. For
others to receive your transmission, they must be on the same channel as you.
Note:
1. The talking range will depend on your surroundings and environment. It will be
affected by obstructions such as hills or buildings.
2. Don’t try to use two devices which are less than 1.5m (5 feet) apart. Otherwise,
you may experience interference.
5. Changing Channels
Press the MENU button once, the channel number will ash on the display.
Press the up/down  button to change the channel.
Press the Call/PTT button to conrm and return to stand-by mode.
Note: if no button is pressed within 15 seconds during setting, the device will return
to stand-by mode.
6. CTCSS (Continuous Tone Coded Squelch System)
Press the MENU button twice, the current CTCSS code will ash on the display.
Press the up/down  button to change the 38 available codes.
Press the Call/PTT button to conrm and return to stand-by mode.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 8811400 - WXH 000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 8811400 - WXH 000 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info