784698
17
Zoom out
Zoom in
Previous page
1/60
Next page
17
EN
As a license-free radio operating on the 400-470MHZ frequency band, the
device has 8 available radio channels. If there are many device users near
you, there is a chance that some of the users may be operating on the
same radio channel. When using CTCSS, a low frequency tone (between 67-
250Hz) will be transmitted along with the voice signal. There are 38 available tones
to choose form. You are free to choose one of the 38 available sub-channels. Due
to ltering, these sub-channels will generally not be audible so they will note disturb
the communication. “OF” in the display means: OFF.
7. VOX (Hands free function)
The abbreviation VOX stands for “Voice Operated Exchange“. A walkie talkie with
the VOX mode switched on is sound-activated, that means the transmission only
switches on when a certain noise level is reached. You can set the voice activation
level yourself. Press the MENU button three times, the current VOX setting will ash
on the display and the VOX icon will display, Press UP button to set the VOX sen-
sitivity level between 1 and 3 level (level 3 is the high sensitive level).
Press down button until “OFF” appears on the display to turn VOX OFF.
Press the Call/PTT button to conrm and return to stand-by mode.
In VOX mode, the radio will transmit a signal when it is activated by your voice or
other sound around you. VOX Operation is not recommended if you plan to use your
device in a noisy or windy environment.
Note: VOX mode will be overridden when you press the Call/PTT button.
8. Scanning for an active radio channel
Press and hold the UP button 2 seconds: The “SCAN” function indicator will ap-
pear on the display and the channel will scan continuously from 1 to 8. Once an ac-
tive channel is found, the scanning will stop and you can listen to the transmission.
When the transmission on the found channel stops, the scanning will resume auto-
matically. Note: If you press Call/PTT button while listening to a found channel, the
device will go back to stand-by mode on the found channel.
9. Monitor
Press and hold the DOWN button about 3 seconds to activate monitor.
Release the DOWN button to return to stand by mode.
10. Setting the Call tones
The device has 10 call tones.
Press the MENU button 4 times, “CA” is displayed and on the current call tone.
Press the UP/ DOWN  button to change another call tones.
Press the Call/PTT button to conrm and return to stand-by mode.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 8811400 - 4D7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 8811400 - 4D7000 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info