632930
19
Zoom out
Zoom in
Previous page
1/172
Next page
19
GB
GB
On the nder holder, there are adjusting
screws for the nder (3) (Figure 1): two clamp
screws (black) and one spring-loaded counter
screw (silver). The clamp screws (black) are
to be screwed (equally as far) in so that you
can feel some resistance; the nderscope is
then secure.
Before beginning an observation, it is abso-
lutely necessary that you align the ndersco-
pe – the nderscope and the main telescope
must point to exactly the same position. Here
is the process for alignment:
Take the 20-mm eyepiece, set it into the ze-
nith mirror and aim the main telescope at an
easy to nd, clearly dened earthbound ob-
ject (Figure 11, e.g. church steeple, gable of
a house). The object should be at least 200-
300 meters away. Hone in on the object so
that it is exactly in the middle of the eld of
vision when you look through the eyepiece.
The image reproduced will be upright, but
rotated around its vertical axis (you will see a
mirror-image). In the nder, however, the re-
produced image will be upright and its sides
will not be reversed, as above. Now turn one
of the two clamp screws (right/left) of the n-
derscope while looking continuously through
the nder. Continue to turn until the nder’s
crosshairs are exactly over the position that
corresponds to what you see when you look
through the eyepiece of the main telescope.
Focusing the nderscope:
Turn the front lens mount (23) one to two
rotations to the left. Now you can adjust the
counter-ring (23a) by itself.
Finally, in the same way (by opening and clo-
sing the clamp screws) secure the 20-mm
eyepiece in the zenith mirror.
Be sure that the entrance of the eyepiece (the
end you look into) is facing straight upwards.
This will make observation easier. Alterna-
tively, loosen the clamp screws (21) on the
eyepiece holder and turn the zenith mirror
into this position.
7. Mounting and Adjusting the Finder
Slide the foot of the nder holder (24) com-
pletely into the nder holder base on the te-
lescope tube (Figure 10). The nder holder
will snap into place. Be sure that the objective
lens on the nder is pointing in the direction of
the front tube opening.
1!
j
2@
1)
2#
2$
2#
a
d
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 88-45001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 88-45001 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info