784772
13
Zoom out
Zoom in
Previous page
1/76
Next page
13
3.4.2 SETUP DISPLAY CONSOLE
1. Once the console power up, all the segments of the LCD will be shown.
2. When you power up the console for the rst time, and the console is not in AP mode (ashing "AP"
and " " icons), press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter AP mode manually.
Follow section 6 to setup the WI-FI connection.
Start up screen (with 7-in-1 sensor connected)
NOTE:
If no display appears when power up the console, you can press [ RESET ] key by using a pointed object.
If this process still not work, you can remove the backup battery and unplug the adapter then re-power up
the console again.
3.4.3 SYNCHRONIZING WIRELESS 7-IN-1 SENSOR
Immediately after power up the console, while still in synchronization mode, the 7-in-1 sensor can be paired
to the console automatically (as indicated by the ashing antenna ). User may also manually restart the
synchronization mode by pressing the [ SENSOR / WI-FI ] key. Once they are paired up, the sensor signal
strength indicator and weather reading will appear on your console display.
3.4.4 DATA CLEARING
During installation of the wireless 7-in-1 sensor, the sensors were likely to be triggered, resulting in
erroneous rainfall and wind measurements. After the installation, user may clear out all the erroneous data
from the display console. Simply press the [ RESET ] key once to re-start the console.
3.5 TABLE STAND INSTALLATION
The unit is designed for
desktop or wall mount for easy
viewing. Follow the steps to
hook the table stand on the
bottom of the console.
Step 1 Step 2
EN
Manual_7003200_4Cast-WIFI-Weather-Center-7in1_en-de_BRESSER_v032022a.indb 13Manual_7003200_4Cast-WIFI-Weather-Center-7in1_en-de_BRESSER_v032022a.indb 13 16.03.2022 11:22:3216.03.2022 11:22:32
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7903200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7903200 in the language / languages: English, German as an attachment in your email.

The manual is 10.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7903200

Bresser 7903200 User Manual - Dutch - 44 pages

Bresser 7903200 User Manual - French - 44 pages

Bresser 7903200 User Manual - Spanish - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info