771278
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
HISTORY DATA
(all records in the past 24 hours)
The main unit automatically records and displays data of the past 24
hours on the hour.
To check all the history data in the past 24 hours, press the HISTORY
button.
E.g. current time 7:25 a.m., Mach 28:
Press HISTORY button repeatedly to view past readings at 7:00am,
6:00am, 5:00am, …, 5:00am (Mar 27), 6:00am (Mar 27), 7:00am (Mar 27)
The LCD will display the past indoor and outdoor temperature & humidity,
value of air pressure, wind chill, wind speed, rainfall and their time and
date.
MAXIMUM / MINIMUM MEMORY FUNCTION
1. Press MAX/MIN button to check the maximum/minimum records.
The checking orders will be: Outdoor max temperature > Outdoor min
temperature > Outdoor max humidity > Outdoor min humidity > Indoor
max temperature > Indoor min temperature > Indoor max humidity
> Indoor min humidity > Outdoor max wind chill > Outdoor min wind
chill > Outdoor max heat index > Outdoor min heat index > Indoor max
dewpoint > Indoor min dewpoint > Max pressure > Min pressure > Max
average > Max gust > Max rainfall.
2. Press and hold MAX/MIN button for 2 seconds to reset the maximum
and minimum records.
NOTE!
When maximum or minimum reading is displayed, the corresponding
timestamp will be shown.
HI / LO ALERT
HI/LO alert are used to alert you of certain weather conditions. Once
activated, the alarm will turn on and amber LED starts flashing when a
certain criterion is met. The following are areas and type of alert provided:
Bereich Verfügbarer Alarm-
Typ
Indoor temperature HI AL / LO AL
Indoor humidity HI AL / LO AL
Outdoor temperaturw HI AL / LO AL
Outdoor humidity HI AL / LO AL
Rainfall HI AL*
Wind speed HI AL
*Daily rainfall since midnight
HI / LO alert setting (Fig. 29)
1. Press button several times until the desired area is selected.
2. Use or buttons to adjust the setting.
3. Press button to confirm and continue to next setting.
Fig. 29
Enable/Disable HI / LO alert (Fig. 30)
1. Press button several times until the desired area is selected..
2. Press button to turn the alert on or off.
3. Press button again to confirm and continue to next setting.
Fig. 30
NOTE!
1. The unit will automatically exit setting mode in 5 seconds if no
button is pressed.
2. When ALERT alarm is on, the area and type of alarm that triggered the
alarm will be flashing and the alarm will sound for 2 minutes.
3. Press SNOOZE/LIGHT button when alarm sounds to interrupt the
alarm. The alarm will then start again after 5 minutes.
4. Press button when alarm sounds to deactivate the alarm until
next time.
The alarm automatically turns off after 2 minutes.
WIRELESS SIGNAL RECEPTION
Fig. 31
No sensor Signal searching Strong signal Weak signal Signal lost
The 5-in-1 sensor is capable of transmitting data wirelessly over an
approximate operating of 150m range (line of sight).
Occasionally, due to intermittent physical obstructions or other
environmental interference, the signal may be weaken or lost.
In the case that the sensor signal is lost completely, you will need to
relocate the main unit or the wireless 5-in-1 sensor.
POINTING 5-IN-1 SENSOR TO THE SOUTH
The outdoor 5-in-1 sensor is calibrated to be pointing to North by
default. However, in some cases, users may wish to install the product
with the arrow pointing towards the South, especially for people living
in the Southern hemisphere (e.g. Australia, New Zealand).
1. First install the outdoor 5-in-1 sensor with its arrow pointing to the
South. (Please refer to 'Installation' chapter for mounting details)
2. Press and hold button for 8 seconds until the upper part (Northern
hemisphere) of the compass rose is blinking.
3. Use or button to change to lower part (Southern hemisphere).
Fig. 32
Northern hemisphere Southern hemisphere
4. Press button again to confirm and exit.
NOTE!
Changing from hemisphere setting will automatically switch the
direction of the moon phase on the display.
MOON PHASES
In the Northern hemisphere, the moon waxes (the part of the moon we
see that glows after the New Moon) from the right. Hence the sun-lit
area of the moon moves from right to left in the Northern hemisphere,
while in the Southern hemisphere, it moves from left to right. Below are
the 2 tables which illustrate how the moon will appear on the main unit.
Northern hemisphere:
New moon Full moon
Waxing crescent Waning gibbous
First quarter Third quarter
Waxing gibbous Waning crescent
Southern hemisphere:
New moon Full moon
Waxing crescent Waning gibbous
First quarter Third quarter
Waxing gibbous Waning crescent
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7902512 Weather Center 5-in-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7902512 Weather Center 5-in-1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7902512 Weather Center 5-in-1

Bresser 7902512 Weather Center 5-in-1 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info