784767
56
Zoom out
Zoom in
Previous page
1/64
Next page
56
7. Press any key on the front side to save alert on /o󰀨 status and back to normal mode, or it
will automatically back to normal mode after 30 seconds without pressing any key.
TO SILENCE THE ALERT ALARM
Press [ALARM / SNOOZE] key to silence the alert alarm or let the alarm automatically turn o󰀨 after 2
minutes.
NOTE:
- Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and readings will
ash.
- If the alert alarm is automatically o󰀨 after 2 minutes, the alert icon and readings will still keep ash until
the weather reading is out of the alert range.
- The weather alert will sound again when the weather readings falls into the alert range again.
BACK LIGHT
The main unit back light can be adjust, using the [ HI / LO / AUTO ] sliding switch to select the appropriate
brightness:
- Slide to the [ HI ] position for the brighter back light.
- Slide to the [ LO ] position for the dimmer back light.
- Slide to the [ AUTO ] position for the auto adjust back light that according to environment light level.
DISPLAY CONTRAST
Press [ / ] key in normal mode to adjust LCD contrast in order to t table stand or wall mount angle.
MAINTENANCE
BATTERY REPLACEMENT
When low battery indicator “ ” is displayed
in OUT or CH section, it indicates that the
outdoor 7-IN-1 sensor and/or current channel
sensor battery power is low respectively.
Please replace with new batteries.
WIRELESS 7-IN-1 SENSOR MAINTENANCE
CLEANING THE HYGRO-THERMO
SENSOR
1. Remove the 2 screws at the bottom
of the radiation shield.
2. Gently pull out the bottom 4 shields.
3. Carefully remove any dirt or insects
on the sensor and ventilation fan (do
not let the sensors inside get wet).
4. Clean the shield with water to remove
any dirt or insects.
5. Install all the parts back when they
are clean and fully dried.
CLEANING THE RAIN COLLECTOR
1. Rotate the rain collector by turning it
30°anti-clockwise.
2. Gently remove the rain collector.
3. Clean and remove any debris or
insects.
4. Install the collector when it is clean
and fully dried.
REPLACE THE WIND VANE
Unscrew and remove the wind
vane for replacement.
CLEANING THE UV SENSOR AND
CALIBRATION
For precision UV measurement,
gentle clean the UV sensor cover
lens with damp micro-ber cloth.
Over time, the UV sensor will
naturally degrade. The UV sensor
can be calibrated with a utility grade
UV meter.
REPLACE THE WIND CUP
1. Remove rubber cap and Unscrew.
2. Remove the wind cup for
replacement.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7803300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7803300 in the language / languages: English, German as an attachment in your email.

The manual is 9.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7803300

Bresser 7803300 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info