784771
32
Zoom out
Zoom in
Previous page
1/76
Next page
32
8.1.1 FIRMWARE UPDATE STEP
1. Download the latest version rmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer to section
6.1 and 6.2).
3. From the SETUP page, press ADVANCED to enter advance setting
4. Under the rmware upload section, press Browse to locate the rmware le saved on your PC/Mac.
5. Press Upload to start rmware update.
The update time is around 5 ~ 10 minutes. While updating, the progress
will be displayed (i.e. 100 is completion).
6. The console will restart once the update is completed.
7. The console will stay in AP mode for you to check the rmware version and all the current setting.
Simply press and hold [ SENSOR / WI-FI ] key for 6 seconds to exit AP mode.
IMPORTANT NOTE:
- Please keep connecting the power during the rmware update process.
- Please make sure your PC/Mac's WI-FI connection is stable.
- When the update process start, do not operate the PC/Mac and console until the update nished.
- During rmware update the console will stop upload data to the cloud server. It will reconnect to your WI-
FI router and upload the data again once the rmware update succeed. If the console cannot connect to
your router, please enter the SETUP page to setup again.
- After the rmware update, If the setup informations are missing, please input the setup information again.
- Firmware update process have potential risk, which cannot guarantee 100% success. If the update fail,
please redo the above step to update again.
8.2 BATTERY REPLACEMENT
When low battery indicator “ ” is displayed near the antenna icon
of the sensor(s), it indicates that the outdoor 7-IN-1 sensor and/or
current channel sensor(s) battery power is low respectively. Please
replace with new batteries.
8.2.1 RE-PAIRING THE SENSOR(S) MANUALLY
Whenever you changed the batteries of the 7-in-1 weather sensor array or other additional
sensors, re-synchronization must be done manually.
1. Change all the batteries to new ones in the low battery sensor(s).
2. Press [ SENSOR / WI-FI ] key on the console to enter sensor synchronization mode (as indicated by
the ashing antenna ).
8.3 RESET AND FACTORY RESET
To reset the console and start again, press the [ RESET ] key once or remove the backup battery and then
unplug the adapter.
To resume factory settings and remove all data, press and hold the [ RESET ] key for 6 seconds.
Manual_7003200_4Cast-WIFI-Weather-Center-7in1_en-de_BRESSER_v032022a.indb 32Manual_7003200_4Cast-WIFI-Weather-Center-7in1_en-de_BRESSER_v032022a.indb 32 16.03.2022 11:22:3716.03.2022 11:22:37
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7803200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7803200 in the language / languages: English, German as an attachment in your email.

The manual is 10.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7803200

Bresser 7803200 User Manual - Dutch - 44 pages

Bresser 7803200 User Manual - French - 44 pages

Bresser 7803200 User Manual - Spanish - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info