Manual Bresser 7060200 - Tendence FSX (page 12 of 116) (English, German, Dutch, French, Spanish)

785326

Zoom out

Zoom in

1/116

12 / 116

4. Set up/operate the base unit and sensor within the ef-

fective transmission range.

5. Make sure that the base unit and the radio sensor are

set to the same channel.

When changing the batteries, always remove the batteries

in both the base unit and the sensor and reinsert them in

the correct order so that the radio connection can be re-es-

tablished. If one of the two devices is operated via a mains

power connection, the power connection for this device

must also be disconnected briefly when changing the bat-

tery. If, for example, only the batteries in the sensor are re-

placed, the signal cannot be received or can no longer be

received correctly.

Note that the actual range depends on the building materi-

als used in the building and the position of the base unit and

outdoor sensor. External influences (various radio transmit-

ters and other sources of interference) can greatly reduce

the possible range. In such cases, we recommend finding

other locations for both the base unit and the outdoor

sensor. Sometimes a shift of just a few centimetres is

enough!

Though the remote unit is weather proof, it should be placed

away from direct sunlight, rain or snow.

7 Setting up power supply

Base unit

1. Remove the battery compartment cover.

2. Insert the batteries into the battery compartment. En-

sure that the battery polarity (+/-) is correct.

3. Replace the battery compartment cover.

4. Wait until the indoor temperature is displayed on the

base station.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7060200 - Tendence FSX in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 8.84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bresser 7060200 - Tendence FSX Manual

Product: