729964
8
Zoom out
Zoom in
Previous page
1/16
Next page
8 / 16
1 Current time (hours) 2 Current time (minutes)
3 Snooze function enabled 4 Alarm enabled
5 Battery level (base station) 6 Current time (seconds)
7 Indoor temperature 8 Relative humidity (indoor) in %
9 Temperature trend (indoor) (rising, steady
or falling)
10 Relative humidity (outdoor) in %
11 Selected channel for remote sensor 12 Temperature unit (°C or °F selectable)
13 Outdoor temperature 14 Battery level (remote sensor)
15 Temperature trend (outdoor) 16 Weekday
17 Month 18 Day
19 Alarm time (minutes) 20 Symbol for alarm time setting
21 Highest or lowest value for indoor temper-
ature (depending on 18)
22 Highest or lowest value for indoor humidity
(depending on 23)
23 Symbol for highest (MAX) or lowest (MIN)
value (indoor)
24 Highest or lowest value for outdoor humid-
ity (depending on 25)
25 Symbol for highest (MAX) or lowest (MIN)
value (outdoor)
26 Highest or lowest value for outdoor tem-
perature (depending on 25)
27 Symbol for channel rotation 28 Year
29 Alarm time (hours)
8 Before starting operation
NOTICE
Avoid connectivity disruptions!
To avoid connectivity disruptions between the devices, consider the following points before starting
operation.
1. Place base station (receiver) and remote sensor (sender) together as close as possible.
2. Set up power supply for the base station and wait until the indoor temperature is displayed.
3. Set up power supply for the remote sensor.
4. Position the base station and the remote sensor within the effective transmission range.
5. Ensure that the base station and remote sensor are assigned to the same channel.
When changing batteries always change batteries in the main unit as well as all remote units and re-
place them in the correct order, so the remote connection can be re-established. If either of the
devices is mains-powered, the power supply must be disconnected for a short moment also for this
device when exchanging the batteries. If batteries are exchanged in only one of the devices (i.e. the
remote sensor) the signal can’t be received or can’t be received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and re-
mote units. Due to external influences (various RC devices and other sources of interference), the
maximum distance can be greatly reduced. In such cases we suggest to position the main unit and the
remote sensor at other places. Sometimes all it takes is a relocation of one of these components of a
few inches! Though the remote unit is weather proof, it should be placed away from direct sunlight,
rain or snow.
9 Setting up power supply
Base station
1. Put the DC connector into the connection socket of the base station.
2. Put the mains plug into the power outlet.
3. The device is energized directly.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7060100 MyTime Crystal P Colour at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7060100 MyTime Crystal P Colour in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7060100 MyTime Crystal P Colour

Bresser 7060100 MyTime Crystal P Colour User Manual - German - 16 pages

Bresser 7060100 MyTime Crystal P Colour User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info