729927
10
Zoom out
Zoom in
Previous page
1/20
Next page
10 / 20
6. Finally press the TIME SET button to save the settings and exit the setting mode.
11 Alarm setting
1. Press and hold ALARM button for approx. 3 seconds to enter the alarm time setting mode.
2. Digits to be set are flashing.
3. Press +/CHANNEL or -/MEM button to change the value.
4. Press ALARM button to confirm and continue to the next setting.
5. Settings order: Hours > Minutes
6. Finally press the ALARM button to save the settings and exit the setting mode. Alarm will be activ-
ated automatically. The symbol will be displayed.
7. Press ALARM button in normal display mode to display the alarm time.
8. Press ALARM button during the alarm time display to disable the alarm. The symbol will not be
displayed.
12 Snooze function
1. When the alarm sounds, press SNOOZE button to activate the snooze function. The alarm will
sound again in 5 minutes.
2. Press ALARM button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.
13 Receiving measurements automatically
Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
14 Manual measurement display
1. Press -/MEM button several times to display the saved values one after another.
2. Display order: Temperature maximum value (outdoor) > Temperature minimum value (outdoor) >
Humidity maximum value (outdoor) > Humidity minimum value (outdoor) > Temperature maximum
value (indoor) > Temperature minimum value (indoor) > Humidity maximum value (indoor) > Hu-
midity minimum value (indoor)
3. Press and hold -/MEM button for approx. 3 seconds to delete the value currently displayed.
15 HI/LO Alert
HI/LO alert are used to alert you of certain weather conditions. Once activated, an alarm sound is
trigger and the alert icon flashes as soon as a set value is reached.Supported areas and alarm types:
Area Type of alert available
Indoor temperature HI AL / LO AL
Outdoor temperature HI AL / LO AL
Indoor humidity HI AL / LO AL
Outdoor humidity HI AL / LO AL
HI AL = High alert / LO AL = Low alert
HI/LO alert setting
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7007900 Meteo THBM Colour at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7007900 Meteo THBM Colour in the language / languages: English as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7007900 Meteo THBM Colour

Bresser 7007900 Meteo THBM Colour User Manual - German - 20 pages

Bresser 7007900 Meteo THBM Colour User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info