729945

Bresser 7007550 Meteo NBF Colour Manual

20
Zoom out
Zoom in
Previous page
1/24
Next page
20 / 24
1 Outdoor temperature value 2 Temperature unit (°C or °F selectable)
3 Indoor temperature value 4 Temperature unit (°C or °F selectable)
5 Temperature trend (rising or falling) 6 Battery level indicator (base station)
7 Symbol for highest (MAX) or lowest (MIN)
value (indoor)
8 Humidity trend (rising or falling)
9 Indoor humidity value 10 Atmospheric pressure (rising or falling)
11 Atmospheric pressure value 12 Symbol for highest (MAX) or lowest (MIN)
atmospheric pressure value
13 atmospheric pressure unit (inHg or hPa
selectable)
14 Atmospheric pressure history (12 hours)
15 Moon phases 16 Weekday
17 Month (M) 18 Day (D)
19 Alarm symbols 20 Current time (minutes)
21 Current time (hours) 22 AM/PM information in 12-hour time mode
23 Time zone (ZONE) 24 Symbol for radio signal
25 Daylight saving time (DST) 26 Snooze function enabled
27 Graphical weather trend display 28 Humidity value (outdoor)
29 Selected channel for remote sensor 30 Data reception symbol
31 Battery level indicator (remote sensor) 32 Symbol for highest (MAX) or lowest (MIN)
value (outdoor)
8 Before starting operation
NOTICE
Avoid connectivity disruptions!
To avoid connectivity disruptions between the devices, consider the following points before starting
operation.
1. Place base station (receiver) and remote sensor (sender) together as close as possible.
2. Set up power supply for the base station and wait until the indoor temperature is displayed.
3. Set up power supply for the remote sensor.
4. Position the base station and the remote sensor within the effective transmission range.
When changing batteries always change batteries in the main unit as well as all remote units and re-
place them in the correct order, so the remote connection can be re-established. If either of the
devices is mains-powered, the power supply must be disconnected for a short moment also for this
device when exchanging the batteries. If batteries are exchanged in only one of the devices (i.e. the
remote sensor) the signal can’t be received or can’t be received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and re-
mote units. Due to external influences (various RC devices and other sources of interference), the
maximum distance can be greatly reduced. In such cases we suggest to position the main unit and the
remote sensor at other places. Sometimes all it takes is a relocation of one of these components of a
few inches! Though the remote unit is weather proof, it should be placed away from direct sunlight,
rain or snow.
9 Setting up power supply
Base device
1. Put the DC connector into the connection socket of the base station.
2. Put the mains plug into the power outlet.
3. The device is energized directly.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7007550 Meteo NBF Colour at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7007550 Meteo NBF Colour in the language / languages: English, German as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7007550 Meteo NBF Colour

Bresser 7007550 Meteo NBF Colour User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info