729954
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
8. Press MEM/ or CH/ to set the hours for the current time.
9. Press AL/SET to switch to the next setting.
10. Press MEM/ or CH/ to set minutes for the current time.
11. Press AL/SET to switch to the next setting.
12. Press MEM/ or CH/ to switch between ON or OF to enable or disable
24 hour measurement data storage.
13. Press AL/SET to save and exit settings mode. If there is no operation for
20 seconds, the existing setting will be saved and the device returns to
normal display mode.
NOTE!
When choosing ON for 24 hour measurement data storage all stored MIN/
MAX values for temperature and humidity will be deleted daily at 0:00
h! When choosing OFF the data will be stored indefinitely until a battery
change is required.
Alarm time setting
To set the alarm time, proceed as follows:
1. In normal time mode press the AL/SET touch control (10b) once to switch
to alarm time display.
2. Press the AL/SET for approx. 3 seconds to enter the alarm time settings
mode. Hours will flash.
2. Press the MEM/ or CH/ touch control (10a/10c) to set the desired
hours.
3. Press the AL/SET to switch to the next setting.
4. Press the MEM/ or CH/ touch control (10a/10c) to set the desired
minutes.
5. Press the AL/SET to switch to the next setting.
6. Press the MEM/ or CH/ touch control (10a/10c) to switch between ON
or OFF to enable or disable the alarm.
7. Press the AL/SET to save and exit settings mode. The symbol will be
displayed when the alarm was enabled.
8. Press SNOOZE/LIGHT button (16) when alarm sounds to interrupt the
alarm. The symbol will flash and the alarm will sound again after 5
minutes. Press the AL/SET to deactivate the alarm until next day.
Temperature and humidity
2. Once the batteries are installed the main unit will start displaying the interior
measurement information. The main unit will display the information from
the outdoor sensor for the first time approximately 3-4 minutes after the
power supply was established.
Manual_7007401_RC-Hygrometer_en-de_BRESSER_v082019a.indd 9 26.08.2019 08:12:25
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7007401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7007401 in the language / languages: English, German as an attachment in your email.

The manual is 6,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info