32 / 40
2. Press the RESET button on the base station first and
then press the RESET button on the remote sensor.
Station and Sensor are now paired.
9 Automatic time setting
After the power supply was established, the clock will auto-
matically search for the radio signal. The clock will automat-
ically search for the radio signal.
If the radio signal is received correctly, the date and time
will be set automatically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the
following steps:
1. Press RCC button at the base station for approx. 2
seconds to initialize the radio signal reception again.
2. If the device is still not receiving the signal, the time
must be set manually.
Read the detailed manual for more information about
manual time and alarm setting (see download information
on page 2).
10 Manual time setting
1. Press and hold TIME SET button for approx. 3 seconds
to change to time setting mode.
2. Digits to be set are flashing.
3. Press MEM / DOWN or CH / UP button to change the
value.
4. Press TIME SET button to confirm and continue to the
next setting.
