785367
11
Zoom out
Zoom in
Previous page
1/44
Next page
EN
11

(it will show 401ppm on screen)


If the display shows „0“, it means that the calibration
failed (reason may be unsteady CO2 environment)

START THE DEVICE
Connect the AC power adapter to the micro USB port (4) of
-
vice. After switching on, the device begins preheating. The
LCD displays a countdown of 30 seconds. The buttons are
not operational during this time. Once the countdown is

SETTINGS MODE
Press the MODE button for about 2 seconds to enter the

alarm. Choose the PPM value when the alarm should start.
Press the RIGHT or LEFT button to select the position to be
changed. Press the up or down button to adjust the value.

and switch to the next setting.
Settings sequence: Carbon dioxide alarm > Date setting
(Month / Day / Year) > Time setting (Minutes / Seconds / Hour)
Finally, press the MODE button for about 2 seconds to
save the settings and exit settings mode.
Note:
The factory default carbon dioxide concentration alarm
value is 2000 PPM. All settings can also be made via the
included software. To check the time, it is necessary to
hold down the MODE button to enter the settings mode.
CARBON DIOXIDE ALARM
Press the Alarm button to activate or deactivate the
carbon dioxide alarm. The alarm will sound once the
concentration of carbon dioxide reaches the alarm value.
Press the LEFT button to deactivate the alarm sound.
Press the LEFT button again to reactivate the alarm sound.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7004040 CO2 Air Quality Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7004040 CO2 Air Quality Monitor in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 3.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info